Bedienungsanleitung Alcatel Temporis Mini Slim (Seite 1 von 2) (Englisch, Spanisch)

586657

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

INTRODUCTION

Your Telephone is designed to give you exibility in use, and high quality

performance. To get the most from your new telephone, we suggest that

you take a few minutes right now to read through this instruction manual.

If you have any questions or problems, consult the Troubleshooting Tips

for the solution.

PARTS CHECKLIST

Your package should contain the following items:

Model Temporis Mini Slim-EX

00030402 (Rev.0 E/S)

09-37

Printed in China

BEFORE YOU BEGIN

MODULAR JACK REQUIREMENT

You need an RJ11C type modular jack, which is the

most common type of phone jack and might look like

the one pictured here. If you don’t have a modular jack,

call your local phone company to nd out how to get

one installed.

INSTALLING THE PHONE

Your telephone should be placed on a level surface such as a desk top,

or you can mount it on a wall , A desktop /wall mounting pedestal is built

into the base of the phone.

Connect the telephone line cord to a modular telephone jack.

Slide the RINGER switch (on the handset ) to ON.

Set PULSE/ TONE switch (on the handset ) to TONE for touch-toneservice,

or set it to PULSE for rotary service. If you don’t know whichtype of

service you have, check with the phone company.

WALL MOUNT INSTALLATION

Your telephone may also be mounted on a wall plate (not included).

NOTE: To prevent the handset from

falling out of the cradle while the phone

is hanging on the wall, you must reverse

the handset hook (located on the base).

Push the handset hook up and out with

your thumb , turn it over ,and replace it in

the slot on the base.

Slip the mounting holes (on the bottom

of the base) over the wall plate posts and

rmly slide the unit down into place.

Plug the telephone line cord into a modular

wall phone jack.

WRAPPING THE TELEPHONE LINE CORD

In desktop mode,you may want to wrap the excess telephone line cord

through the grooves provided on the bottom of the base.

USING THE TELEPHONE FEATURES

RECEIVING A PHONE CALL

Be sure the RINGER switch is set to the High ( ) position.

When the phone rings. lift the handset and begin your conversation.

Slide the RINGER switch to the Off ( ) position when you do not want

to interrupted by the phone ringing.

RINGER VOLUME

You may control the ringer volume level with the switch located between

REDIAL and FLASH button on the handset.

= ringer tone will be loud.

= telephone will not ring.

PLACING A PHONE CALL

Lift the handset and wait for a dial tone.

Dial the telephone number you wish to call.

FLASH BUTTON

Press the FLASH button instead of using the

hook switch to activate customer calling services

such as call waiting or call transfer , which

are provided by your local phone company.

select the appropriate ash timing (on handset,

600ms,300ms, 100ms).

REDIAL BUTTON

This unit redials up to 32 digits. To automatically

redial the last number You called:

Pick up the handset to get a dial tone.

Press redial.

TEMPORARY TONE FEATURE

If you have Pulse ( rotary ) service ,and want to

access customer calling services that require

touch –tone dialing ,such as getting information

from a local bank ,you can use this feature.

Press the TONE button ( * ) after you have

connected to the service in order to enable

touch–tone dialing.

When you hang up, the phone automatically

returns to pulse dialing mode.

REDIAL FLASH

TONE button

TROUBLESHOOTING TIPS

PROBLEM SOLUTION

No dial tone

Won’t dial out

Check hook switch to make sure it pops up.

Make sure TONE / PULSE is set to correct position.

•

Phone doesn’t ring Make sure RINGER switch is set to High ( )

You might have too many phones on one line.

•

Feedback when

dialing in PULSE mode

This is normal, power uctuates with phone

outpulsing.

•

Can’t be heard by

other party

Make sure phone cord is securely plugged in.

Make sure other phones aren’t off the hook

at the same time you ’ re using the phone.

It is normal for the volume to drop when

additional phones are used at the same time.

•

CARE AND MAINTENANCE

To keep your phone working and looking good ,follow these guidelines;

Avoid putting near heating appliances and devices that generate

electrical noise (for example , motors and uorescent lamps)

DO NOT expose to direct sunlight or moisture.

Avoid dropping and other rough treatment of the unit.

Never use a strong cleaning agent or abrasive powder because this

will damage the nish.

Retain the original package in case you need to ship it at a later date.

•

Used equipment must be disposed of in compliance with

current environmental protection regulations. You should

return it to your receiver or dispose of it in an approved

recycling center.

Thomson Asia Limited

3/f., Delta House, 3 On Yiu Street,

Siu Lek Yuen, Shatin, Hong Kong

www.thomson-asia.com.hk

Trimline Phone

User's Guide

Base unit with handset

Alcatel logo and Alcatel name are trademarks of Alcatel and used under license by Thomson Telecom.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alcatel Temporis Mini Slim Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info