Unpacking your phone
In the box you will find:
• the cordless handset (two handsets with a T
T
• the base unit
• two rechargeable battery cells for each handset
• a battery compartment cover for each handset
• a telephone line cable for the base unit
• a mains power lead and adapter for the base unit
• charger pods, each with an attached mains power lead and adapter
multihandset system
Before you start to use your telephone make sure that all batteries are fully
charged for 15 hours.
Important note: This telephone is not designed for Emergency calls when the
mains power fails
For Emergency calls you should have a basic phone that operates without
mains power
power failure.
USER'S GUIDE
1. Press in idle mode to browse the phonebook entries.
can press MENU keyPHONEBOOK and then press OK.
2. Press NALIST and then press OK key to confirm.
The phonebook entries will be listed in alphabetical order
NA
3. Press OK key to view the details of the selected entry
Note : Instead of pressing NA key to browse the phonebook entries,
you can press the numeric key corresponding to the first letter of the entry you
wish to locate.
Modify a phonebook entry
1. Press MENU key to enter menu selection.
2. Press NAPHONEBOOK and then press OK key
to select.
3. Press NAEDIT ENTR and then press OK key
to select.
4. Press NA
The current name is displayed.
Edit the name and then press OK key to confirm.
5. Edit the number and then press OK key to confirm.
played.
Delete a phonebook entry
1. Press MENU key to enter menu selection.
2. Press NAPHONEBOOK and then press OK key
to select.
3. Press NADELETE and then press OK key to select.
4. Press NA
5. Press OK key again to confirm.
Delete all entries from the phonebook list
1. Press MENU key to enter menu selection.
2. Press NAPHONEBOOK and then press OK key
to select.
3. Press NADELETE ALL and then press OK key
to select.
4. Press OK key again to confirm.
Direct access memory
There are 2 direct access memories (Keys 1 & 2) in addition to the phonebook
memory
stored phone number
Add/edit direct access memory
1. Press MENU key to enter menu selection.
2. Press NAPHONEBOOK and then press OK key to
select.
3. Press NADIRECT MEM . and then press OK key to
select.
4. Press NAKEY 1 or KEY and then press OK key
The stored name is displayed, or NO NUMBER if it is empty
If there is no number stored for the selected key or if you want to change the
name or number currently stored, press MENU key to enter direct memory
menu to add/edit the name or number
5. Press NAEDIT NUMBER and then press OK key
to select. The display shows the currently stored name, or ENTER NAME if
there is no number stored. Edit or enter the name you want and then press
OK keyENTER NUMBER
if there is no number stored. Edit or enter the number you want and then press
OK key to confirm.
Delete direct access memory
1. Press MENU key to enter menu selection.
2. Press NA key to select PHONEBOOK and then press OK key
to select.
3. Press NA key to select DIRECT MEM . and then press OK key
to select.
4. Press NA key to select KEY 1 or KEY and then press OK key
The stored name is displayed (or NO NUMBER if it is already empty).
5. Press MENU key to enter direct memory menu.
6. Press NA key to select DELETE and then press OK key to select.
Press OK key again to confirm.
Using the redial list
The redial list stores the last 5 numbers dialed.
Access redial list
1. Press REDIAL key to browse the
redial list. The last number dialed will appear first in the redial list.
2. Press OK key to view the details of the selected entry
Save a redial number into the phonebook
1. Press REDIAL
2. Press NA
3. Press MENU key to display SA, then press OK key to display
ENTER NAME. Enter the name of the contact (maximum 12 characters) and
then press
Phone Function Keys
1 OK key
Press to select the function displayed on the
handset screen directly above it.
2 Back/clear key
Press to delete a digit/a character in editing mode
Press to return to idle mode.
Press and hold to change the handset idle display
between handset name and date/time.
3 Navigation key
Press UP to access the call log* and press DOWN
to access the phonebook when in idle mode.
Press UP/DOWN to increase or decrease
earpiece volume during a call.
Press to increase or decrease the ringer volume.
Press UP/DOWN to increase or decrease
handsfree volume (V
Scroll up/down a list.
4 T
Press to accept or make a call
Press to activate handsfree mode (V
only)
5 Hang-up/Exit key
Press and hold to switch the handset power
on/off.
Press to end a call.
Press to return to idle mode in other menus.
6 Recall (Flash) key
Access to operator services*
7 Menu key
Press to access the main menu.
8 Redial key
Press to access the Redial list.
9 Star key
Press and hold to lock/unlock keypad.
Press and hold to toggle between the external and internal calls when both are set up.
10 Hash key
Press and hold to insert a pause during a call.
Press and hold to turn the ringer on/off.
1Mute key
Press to mute / unmute the handset microphone.
12 Call transfer/Intercom key
Press to initiate an internal call.
Press to hold the line and page another handset during a call.
Press and hold to initiate a conference call.
*Subject to subscritption and availability of the service from the fixed line operator
What the icons mean?
Indicates battery is fully charged.
Indicates battery is fully discharged.
Indicates that an external call is connected or held.
Icon blinks when receiving an incoming call.
Indicates you have a new V
Indicates you have new missed calls*, or the call log is being viewed.
Displays when the phonebook is accessed.
Displays when the alarm clock is activated.
Displays when handsfree is activated (V
Displays when ringer volume is turned off.
Indicates that the handset is registered and within range of the base station.
Icon blinks when the handset is out of range or is searching for a base.
Displays when in menu mode to confirm your selection.
Indicates that more options are available.
Use the UP / DOWN keys to scroll up/down.
Displays when in menu mode.
Select BACK to return to the previous menu level.
A
Alcatel Logo and
1
7
4
3
9
11
5
2
6
10
8
12
www.atlinks.com
Installation and Set-up
Precautions
The signal quality will depend on the location and environment of the base and
handset. Position your V
excessive heat (radiators, direct sunlight, etc.) and protect it from vibrations and
dust. Never allow your telephone to come into contact with water or other liquids,
or with aerosols. T
particular care not to install the base in the immediate vicinity of windows, large
metal objects, reinforced concrete, televisions, music centres, VCR or DVD
players, halogen lamps or heating devices, fluorescent lighting, burglar alarms,
microwave ovens, computers, etc.
This telephone requires an electrical power supply in order to function.
T
moistened with water
NB: Y
designed to receive and transmit telephone calls. It is designed for
connection to the public telecommunications network.
Fit the rechargeable batteries in each handset
1)
400mAh, or Brand name:
in accordance with the polarity marked in the battery compartment.
2) Close the battery compartment cover
to make sure it is secure.
Connecting
1. Plug the base adaptor cord into the power jack on rear panel of the base
and the other end into a 100-240 V
2. Connect telephone line cord into the phone jack on rear panel of the base
and the other end into a main socket.
3. In case of twin or triple system, plug the charger power adaptor cord into
the power jack on rear panel of charger and the other end into a 100-240
V
Before you use the cordless handset for the first time, it’s important to
charge the batteries fully
Leave the handset on the charging cradle for 15 hours.
CAUTION: Use only the power supply that came with this unit. Using other
power supplies may damage the unit.
Base and charger power adaptor :
S003IV060050 100-240V 16V 500mA
S003IV060015 100-240V 16V 150mA
Y
Switching on/off
Press and hold the HANG-UP/EXIT key for more than 2 seconds to
switch on/off the handset in idle mode.
Notes: When the handset is OFF
emergency calls. There will be no ringing during an incoming call.
a call, you will need to switch it back on. It may take some time for the handset
to re-establish a radio link with the base unit.
T
Press and hold the ST
in idle mode.
Note: Incoming calls can still be answered even if the keypad was locked.
Battery safety - CAUTION
ONL
DO NOT use non-rechargeable batteries - they may explode and cause
damage to your telephone.
Read First Before Use
Choosing a site for the base unit and charger pod
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you
will need to insert a microfilter between the telephone and the telephone
line, otherwise you may get interference between the telephone and the
broadband, which could cause problems.
Mute/unmute microphone
When the microphone is muted, the handset displays MUTE ON, and your caller
cannot hear you.
During a call, press the MUTE key to turn on/off the microphone.
Paging
The paging feature enables you to locate a missing handset if the handset is
in range and contains charged batteries.
Press HANDSET LOCA
station.
Once retrieved, press any key on the handset or the HANDSET
LOCA
Call waiting
If you have subscribed to Call W
tone to inform you that there is a second incoming call. The number or name
of the second caller will also be displayed on your phone if you have
subscribed to Caller Line Identification service (CLI). Please contact your
network provider for more information on this service.
Using your phonebook
Y
How to enter characters?
When you select a field in which you can enter text, you can enter the letters
that are printed on the keys by pressing the relevant key once or several times.
For example, press once to insert the letter ‘A
the letter B, and so on... Spaces and other symbols can be entered using
or .
Store a contact in the phonebook
1. Press MENU key to enter menu selection.
2. Press NAPHONEBOOK and then press OK key
to select.
3. Press OK key again to enter NEW ENTR.
4. Enter the name of the contact (maximum 12 characters).
T
Press OK key to confirm the name entry
5. Enter the number of the contact (maximum 24 digits) and then press OK
key to confirm.
Set time and date
Note: If you subscribe to the Caller Display service, the time and date will be
set automatically when you receive a call, but you may still need to set the
correct year
1. Press MENU key to enter menu selection.
2. Press NACLOCK&ALARM and then press OK key
to select.
3. Press OK key to select DA. The last stored date is displayed.
Enter the current date (YY
Change your handset’
1. Press MENU key to enter menu selection.
2. Press NAPERSONAL SET and then press OK
key to select.
3. Press NAHANDSET NAME and then press OK
key to select. The current handset name is displayed.
4. Press BACK/CLEAR key to delete the characters one by one.
Enter the new name (maximum 10 characters) and press OK key to confirm.
A
Change the display language
1. Press MENU key to enter menu selection.
2. Press NAPERSONAL SET and then press OK
key to select.
3. Press NALANGUAGE and then press OK key
to select.
4. Press NA
confirm.
Note : Once the display language is set, the option menus on the handset will
switch to display in the selected language immediately
Make and answer calls
Make a callPredialling
Dial the number (maximum 24 digits) and then press T
Direct dialling
Press T
(maximum 24 digits).
Call from redial list
Press REDIAL
Press NA
press T
Call from the call log
Press in idle mode.
Press NA
press T
Note: Y
to see the caller
Call from the phonebook
Press in idle mode.
Press NA
press T
Answer and end a call
1. When the phone rings, press Thandsfree mode
thanks to a long
2. T
IMPORT
station or charger pod to end the call.
Use handsfree (only for V
Press and hold the T
T
Adjust the earpiece volume
During a call, press NA
Only use rechargeable batteries with exactly the same specifications as
those supplied with the product.
Using non-rechargeable or non-conforming batteries can damage the
product and could pose a health hazard (see Chapter 9 “T
Specifications”).
Failure to comply with this recommendation will invalidate the manufacturer's
warranty
Batteries can split or leak if incorrectly inserted, opened or exposed to heat.
Never dispose of batteries in a fire: they could explode.
Access phonebook
/
/
/
/
Base station
D
C
What’
A
B
A
B Displays when in menu mode to confirm
your selection.
C Indicates that more options are available.
Use the UP / DOWN keys to scroll up/down.
D Displays when in menu mode.
Select BACK to return to the previous menu
level. Select BACK to delete the last digit/
character entered.
HANDSET LOCA
Press to page handsets.
Press and hold to start registration procedure.
