Bedienungsanleitung Alecto dbx-99 (Seite 6 von 12) (Englisch)

368278

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Power On/Off

Baby Unit

• To switch on, press

. The Green Link light comes on to show

that the units are within range of each other.

• To switch Off, press

until the display goes blank and the link

light goes off

Parent Unit

• To switch on, press

. The Green Link light comes on to show

that the units are within range of each other.

• To switch Off, press

until the display goes blank and the link

light goes off

Note: The parent unit can be used on or off the charging cradle. When

on cradle, the batteries will be recharged at the same time.

However, the time it takes to charge the batteries to full will be

longer when the unit is charged and used at the same time.

When off cradle, the batteries will lose charge over the time, even

if the parent unit is turned off.

Monitoring

• Position the baby unit accordingly. It should be placed at least 1

meter away from the baby.

• Take the parent unit to monitor.

• Audio picked up by the baby unit microphone is depicted on the 7

LEDs on the parent unit (4 green and 3 red). The more audio is

picked up, the more LEDs will be lit. When no audio is picked up,

all 7 LEDs will be off.

• If the volume of the Parent Unit is turned off, an alert will be sound

and the unit will vibrate when the audio picked up reach the second

red led.

Note: Do not position the baby unit and the parent unit close to each

other as a high-pitched feedback noise may be generated.

Sensitivity

You can adjust the sensitivity on Parent Unit to monitor the sound from

Baby Unit. For example, if your baby is a particularly quiet sleeper, you

can increase the sensitivity levels so that you are sure to hear if baby

disturbs or becomes uncomfortable.

• Press scroll to Sensitivity. Press

• Press

or to select the level you want: For example,

when the current sensitivity level is level 3, digit “3” will be

displayed

• There are five levels of sensitivity; level 5 represents the

highest sensitivity, level 1 represents the lowest sensitivity.

• Press

to confirm.

• Press

to return to the standby display.

Adjusting Volume

There are 5 volume levels on each Unit and there is also an Off setting

on the Parent Unit.

On the units,

• Press the

to increase the volume or the to decrease the

volume

Note: You cannot switch the volume off on the Baby Unit.

Changing the volume setting on the Baby Unit will also affect the

volume while talk back and also the volume of lullaby play.

Talk Back

You can use the talk back feature to talk to your baby.

• Press and hold TALK on the Parent unit to speak to baby.

• The display on the Parent shows Talk and the green link lights on

both Units flash.

• Talk into parent unit microphone.

• Release TALK to hear your baby again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto dbx-99 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alecto dbx-99

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info