Bedienungsanleitung Alecto DVM-700 (Seite 41 von 52) (Deutsch, Englisch, Holländisch, Französisch)

668917

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4 OPERATION

4.1 TO SWITCH ON/OFF:

Baby unit & parent unit:

• Briefly press and hold the button to switch on the unit.

• Briefly press and hold the button again to switch off the unit.

when switching on the baby unit, the night light will briefly illuminate

4.2 CONNECTION INDICATOR:

As soon as you switch on the parent unit or baby unit, it will start searching for the

other unit. The connection status is indicated as follows:

Baby unit (see LINK indicator):

• flashing green: the baby unit is searching for the parent unit.

• continuous green: de baby-unit is in contact with the parent unit.

• flashing red: the baby unit has lost the connection with the parent unit for over

30 seconds.

Parent unit (see display):

• text: ‘Link lost, trying to reconnect’: the parent unit is searching for the baby

unit.

• text: ‘Unable to connect, ensure the monitor is turned on and within range’ and

3 short beeps every 10 seconds: the parent unit has lost the connection with

the baby unit for over 30 seconds.

4.3 FIRST TIME USE:

When used for the very first time (or after briefly removing the batteries), the

parent unit will prompt you to set the time when switched on.

If this is not required:

press ‘No’ (the time can still be set at any moment)

If this is required:

1. press ‘Yes’

2. press ‘12hr’ or ‘24hr’ to set the time format

3. adjust the time by pressing and (the hours and minutes are

adjusted separately)

4. press ‘Next’

The parent unit will now ask you whether an introduction of some of the options

should be shown on the display.

If this is not required:

1. press ‘No’ (this introduction may be requested at a later time)

2. press ‘Exit’ to switch on the parent unit as a baby video monitor

If this is required:

1. press ‘Yes’

2. now follow the on-screen instructions.

• ‘Next’ = to continue

• ‘Back’ = to return to the previous subject

• ‘Exit’ = to end the introduction

When the introduction is finished, press ‘Exit’ to switch on the parent unit as a

video baby monitor or press ‘Replay’ to start the introduction again.

Now each time you switch on the parent unit again, the baby monitor function will

be activated directly. See chapter 4.7 for replaying the introduction.

4.4 WATCHING AND LISTENING:

During normal use, the images from the baby unit are shown on the display of the

parent unit. Now the following functions are available:

Reception volume:

• Press the – Vol. + button on top of the parent unit to adjust the reception

volume.

• While adjusting the volume, the current level is

indicated in the display.

• You may choose from 5 volume levels and sound

off.

• When the sound is switched off, the Mute indicator will be illuminated while

the icon appears in the upper part of the display as an extra indicator that the

sound is switched off.

Display on/off:

• Press the Screen On/Off button on top of the parent unit to switch off the

display; this won’t affect the sound.

• Briefly press the Screen On/Off button again to turn

the display back on.

• A disabled display remains switched off, also when

the baby is crying.

• The display is switched on automatically in case of warnings (e.g. the feeding

alert).

Talk

Home

MutePower

Vol.

Talk

Home

MutePower

Vol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DVM-700 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info