Bedienungsanleitung Alecto DVM-750 (Seite 40 von 52) (Deutsch, Englisch, Holländisch, Französisch)

668922

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

3 INSTALLATION

3.1 BABY UNIT: (CAMERA)

The baby unit is not waterproof and thus only suitable for indoor use.

Power adaptor:

1. Connect one of the supplied

power adaptors with the

input at the rear of the baby

unit.

2. Insert the adaptor into a 230V

wall socket.

Only use the supplied power adaptor.

Make sure the baby cannot touch the

cable. Place the baby unit at least 1

to 2 metres away from the baby and bundle

excessive cable length with tape or cable-ties

available specically for this purpose.

Table model or wall model:

You can place the baby unit on a table, cabinet or desk or you can mount it onto

a wall.

Wall-mounting:

Drill two holes in the wall, next to each other at a distance of 3.7 cm from each

other, and insert plugs and screws. Make sure to let the screws protrude for

several millimetres.

Suspend the baby unit by sliding the cut-outs in the camera support over the

screws and pressing the baby unit somewhat downward. Finally, neatly tuck away

the adaptor cable with cable-ties.

Placement tips:

• When used as a baby phone: place the baby unit at least 1-2 metres away

from your baby and make sure to safely tuck away the adaptor cable.

• It’s recommended to place the baby unit as high as possible and away from

large metal surfaces; this ensures an optimal range.

• Don’t connect the adaptor cable at the rear too tight. Allow for sufficient cable

length to ensure that the camera won’t be impeded when moving.

~1-2 m

3.2 PARENT UNIT:

The Parent unit is not waterproof and thus only suitable for indoor use.

Power supply:

The parent unit may be powered directly by the supplied

rechargeable battery. This battery is already installed

during the manufacturing process. Pull the insulating strip

out of the parent unit to activate this battery.

This battery is

recharged by

connecting one

of the supplied

power adaptors to

the charger and

placing the parent

unit onto the charger.

You may also charge the battery by

connecting the power adaptor directly to the

parent unit.

Charging :

As soon as the parent unit is placed onto the charger or when the power adaptor

is connected to the unit and a 230V wall socket, the battery will be charged.

• When using the unit for the first time, please charge the battery for at least 15

hours regardless of the indicator showing a fully charged battery.

• The charging circuit of the battery is controlled electronically. You may leave

the parent unit onto the charger or leave the adaptor connected at all times,

because there’s no risk of overload.

• However, when not using the set for a long period of time (>2 months), it’s

recommended to remove the adaptor from the wall socket and the battery from

the parent unit. When using the set again, you should first fully charge the

battery.

Table stand:

The rear of the parent unit is provided with a table stand. Unfold this stand to

place the parent unit on a table or cabinet.

Home

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DVM-750 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info