2-
Use the 2-channel scan to consecutively listen to
the channel to which the walkie-talkie is currently
set and a 2
nd
channel.
1. MENU button and the word
“2CH” appears at the top of the display
2. or button to select the 2
nd
chan -
nel (‘OF’
3. button to confirm.
4.
‘OF’
SETTINGS
TO CHANGE
CHANNEL:
1. MENU button and the channel
indication starts flashing.
2. or button to select the desired
channel.
3. button to confirm.
TO CHANGE
By setting a sub channel, you won’t be disturbed
as much by other walkie-talkies transmitting on
the same channel or by sources of interference
on the same frequency
1. MENU button and the sub-chan-
nel indication starts flashing.
2. or button to set the desired sub-
channel (1-121) or disable this function by
selecting 0.
3. button to confirm.
Keep in mind that the walkie-talkie at the receiv-
ing end must be set to the same sub channel.
Keep in mind that walkie-talkies with sub
channel 0 can receive all signals on that
channel, also when you’ve set a sub channel on
your walkie-talkie.
TO CHANGE
Y
and ‘tone-off’:
1. MENU button and ‘CA
flashing in the display
2. or button to set the desired call
alert tone (‘0’
will sound through the speaker for you to
check
3. button to confirm
KEY T
Key tones are the tones that sound upon press-
ing a button. Y
off as follows:
1.
off.
2. button and depress the
button for 3 seconds to switch on the walkie-
talkie.
3.
disabled, and vice versa.
ROGER BEEP:
If this function is enabled, a signal tone will sound
at the receiving end as soon as you stop trans-
mitting. The receiving person now knows when
he or she can talk back.
1.
off.
2. button and depress the
button for 3 seconds to switch on the walkie-
talkie.
3.
disabled, and vice versa.
USER TIPS
GENERAL:
The FR-225 is a transceiver operating with radio
waves on the 446 MHz band. The signal transfer
could be disturbed by external influences such
as other walkie-talkies, transmitters, wireless
phones, etc.
If your walkie-talkie receives or causes interfer-
ence, this is usually resolved by switching chan-
nel.
Use of this walkie-talkie is authorized in all EU
countries. If you’d like to bring your FR-225 to
countries outside the EU, refer to the local restric-
tions on the use of PMR446 equipment of the
concerned country
Keep in mind that the signal of the FR-225 may
also be heard by walkie-talkies or receivers other
than yours.
It’s not allowed to make any changes to the elec-
tronics or to the antenna of the FR-225. Service
may only be performed by qualified electricians.
Never use the FR-225 outdoors during thunder-
storms.
POWER:
The battery symbol in the display indicates the
charge of the inserted batteries.
Batteries full
Batteries 1/3 full, a double beep tone is emit-
ted every 10 minutes, please recharge or
replace now
Only recharge the included rechargeable batter-
ies by placing the walkie-talkies onto the supplied
charger or by connecting the power adaptor
directly to the walkie-talkie.
RADIO CONNCTION:
The FR-225 has a range of up to 7km. This range
depends on local conditions such as tall build-
ings, high voltage towers and overhead wires.
optimal range is achieved when the walkie-talkie
has a free view of the receiver
SUB CHANNEL:
A
can receive the signal from all handsets transmit-
ting on the same channel. T-
sible only when you’ve set the same sub channel
as the other W
MAINTENANCE:
• Only clean the FR-225 with a moist cloth.
• Never place the walkie-talkie in direct sunlight
or in a humid environment.
• Prevent water and/or sand from penetrating
the FR-225.
• In case of a failure, first check whether the
FR-225 can be used at a different location.
ENVIRONMENT
• In case the baby video monitor is being
replaced, please return it to your supplier;
they will guarantee environment-friendly
processing.
• Exhausted batteries can be returned to the
supplier of these walkie-talkies or you may
bring them to your local depot for small chemi-
cal waste.
• Never discard empty batteries or exhausted
accumulators as regular household waste.
TECHNICAL SPECIFICA
Operating frequency: 446.00625 MHz to
446.09375 MHz
Subchannelcodes: 38 CTCSS codes +
83 DCS codes
Power output: <6.5dBm
W 3x 1.2V NiMH recharge-
able battery
3x 1.5V
Size AA
Charger power supply:
Usage duration: approx. 29 hours
(5% transmitting)
(5% receiving)
(90% standby)
Headset connector: 2.5mm stereo
Range: up to 7Km
W 205g (incl. battery pack)
Dimensions: 1
(HxBxD)
Protection class: IPX4 (splash-water proof)
TROUBLESHOOTING
Nothing works:
- the battery pack is empty
replace
Poor or no reception:
- weak or empty batteries, recharge them
- channel setting or subchannel set incorrectly (the
sender and receiver must be set to the same chan-
nel, with the same subchannel)
- the distance between the receiver and transmitter is
too large, please decrease the distance
Noise or other additional sounds:
- other sender is present, change the channel
- interference from other devices, switch the other
devices off (if possible)
High whistle:
- the transmitter is too close to the receiver or the
volume of the receiver is set too high, increase the
distance or lower the volume
If this doesn’t resolve the problem, switch off the
handsets, wait several minutes and switch them on
again. If the problem still remains, please contact the
Alecto customer service: www
W
For the
24 months from the date of purchase. During this
period, we guarantee the free repair of defects
caused by material and workmanship errors.
All this subjected to the final assessment of the
importer
HOW TO HANDLE:
If you notice any defect, first refer to the user
manual. If the manual provides no definite
answer-
phone or contact customer service of
THE W
In case of improper use, incorrect connections,
leaking and/or incorrectly installed batteries, use
of unoriginal parts or accessories, negligence
and in case of defects caused by moisture, fire,
flooding, lightning and natural disasters. In case
of unauthorised modifications and/or repairs per-
formed by third parties. In case of incorrect trans-
portation of the device without adequate packag-
ing and when the device is not accompanied by
this warranty card and proof of purchase.
The warranty does not cover connecting batteries
and antenna.
All further liability-
sequential damages, is excluded.
Name:
Address:
Postal code:
City:
T
Keep your receipt or purchase invoice here.
Service Help
WWW
SERVICE@ALECTO.NL
Hesdo, Australiëlaan 1
5232 BB, ‘s-Hertogenbosch
The Netherlands
WWW
SERVICE@ALECTO.NL
Hesdo, Australiëlaan 1, 5232 BB,
‘s-Hertogenbosch,
The Netherlands
ver1.0
