Bedienungsanleitung Alecto FR-70 (Seite 7 von 12) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

708507

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

USER’S MANUAL

INTRODUCTION

The Alecto FR-70 is a PMR-446 Radiophone.

This radiophone allows for free-of-charge com-

munication back and forth, as well as communi-

cation with other ( ) radiophones as long

as these meet the PMR-446 standard.

The Alecto FR-70 is in accordance with the

essential requirements and provisions as

described in the European Directive 2014/53/

EU. The declaration of conformity is available on

the website www.alecto.nl

DISPLAY FUNCTIONS

DCM (Dual Channel Monitoring)

= Specific channel scan

VOX (Voice Controlled Transmitting)

= Voice operated transmission

SCAN = Channel scan

channel number

CTCSS setup

call tone

vibration alarm

‘Receive’

Battery level indication

buttons locked ‘Send’

indication

FUNCTIONS

INSTALLATION

POWER SOURCE:

The FR-70 works on the supplied rechargeable

NiMH batteries, 4 x size AAA, power 4.8V or

by using 4 AAA penlite batteries (excl.). If you

decide to install separate rechargeable batter-

ies, you’ll need to recharge these in an external

charger. The recharge station that comes with

the FR-70 is only suitable for recharging the

supplied battery packs.

1. First, remove the belt clip by pressing the lock

tab back and pushing the belt clip upwards

and out of the radiophone.

2. Now open the battery compartment by releas-

ing the tab at the bottom and lifting the bat-

tery cover.

3. Install the batteries as indicated and pay

attention to

the polarities

(+ and -).

4. Close the bat-

tery compart-

ment and put

the belt clip

back on the

radiophone.

CHARGER:

Plug the adaptor into a 230V 50Hz wall socket

and place the walkie-talkies onto the recharge

station to charge the batteries, the charge indi-

cators will now turn red.

CHARGING:

Charging the FR-70 units is timer-controlled. As

soon as you place the walkie-talkies into the char-

ger, the red charge indicators will switch on and

the battery pack starts charging. When the light

turns green, the charging period is finished and the

battery pack is fully charged. However, you don’t

need to wait for the light to become green, but that

means the batteries may not be fully charged. Each

time you replace the batteries (even when not yet

exhausted) the timer circuit will restart. There’s no

risk of overcharging, because the charging current

is electronically restricted.

Attention: When installing individual AAA batter-

ies, you can still place the walkie-talkies onto the

charger, but the charge indicators won’t light up

and the batteries will not be charged. You can also

place the units on the charger when using non-

rechargeable batteries.

HEADSET:

The FR-70 is provided with a connection for a

headset with a 2.5mm plug at the right side,

underneath the rubber cap.

USING DIRECTLY

Turning on/off – Volume control:

Rotate the volume control somewhat to the

right to turn on the FR-70 and adjust the

desired volume. Rotate the volume control all

the way to the left to turn off the FR-70.

Transmitting:

press the PTT (talk) button to switch on the

transmitter

Receiving:

release the PTT button to receive

Call:

briefly press the button to transmit a call

tone

Background lighting:

Each time you press a function button,

the background lighting of the display will turn

on. This light will turn off automatically if no

further buttons are pressed for 6 seconds.

PTT = Push To Talk

EXTRA FUNCTIONS

VOX FUNCTION:

When you activate the VOX function (VOX =

Voice Activated Transmission), the FR-70 will

start transmitting as soon as you talk into the

microphone.

Switching the VOX function on/off:

1. press the

button 3x, the word ‘VOX’ will

appear.

2. use the

and

button to set the switch-

on sensitivity (‘OF’ is off, ‘1’ is the lowest sen-

sitivity, ‘3’ is the most sensitive)

3. press the PTT button to confirm

We recommend using this function in combina-

tion with headsets.

CHANNEL MONITORING: (monitoring)

This function turns off the noise reduction, allow-

ing you to listen to weaker broadcasters on the

selected channel.

Switching the MONITOR function on/off:

1. press and hold the button for 2 seconds

to turn off noise reduction and listen to the

channel

2. press the button to turn the noise reduc-

tion back on

CHANNEL SCAN:

The scan function allows you to alternate

between listening to the current channel

1. simultaneously press and hold the and

buttons for 1 second to start scanning

press the

button to continue scanning

when you’re only receiving noise on a channel

- press the

button on a stopped channel

to scan all sub-channels

- press the PTT button to finish scanning

SPECIFIC CHANNEL SCAN:

This allows you to alternately listen to the cur-

rently set channel and a 2nd channel:

1. press 8x the button, will appear in

the display

2. use the or button to select the sec-

ond channel (select ‘OF’ to stop scanning)

3. press the PTT button to confirm

USING THE STOPWATCH:

1. press and hold the button for 2 seconds,

the stopwatch timer will appear.

2. press the button to start the timer. Press

the button again to pause and press the

button to reset the timer.

3. press and hold the button for 2 seconds

to return to the normal menu.

ROGER BEEP:

When this function is enabled, the receiving post

will hear a double beep tone as soon as you

stop transmitting. this way, the receiver knows

that he or she can transmit back to you.

Switching the Roger beep on/off:

1. press 6x the button, ‘ON

’ or ‘OF

’ will

start flashing in the display

2. press the button to turn on the function

(‘ON’ in the display) or press the button

to turn the function off (‘OF’ in the display)

3. press the PTT button to confirm

KEY TONES:

Key tones are the tones that sound as soon as

you press a button. You can turn these tones on

or off as follows:

1. press 7x the button, ‘ON

’ or ‘OF

’ will

start flashing in the display

2. press the button to turn on the function

(‘ON’ in the display) or press the button

to turn the function off (‘OF’ in the display)

3. press the PTT button to confirm

FR-70

Headset output

Antenna

Display

PTT button (send)

Microphone

Speaker

Recharge contacts

(rear)

Monitor button

‘Up’ button

‘Lock’ button

Menu button

‘Down’ button

Call button

Alecto FR-70 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alecto FR-70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info