22
USAGE
ATTENTION:
Prior to switch-on the amplifier, set the MIC-1, 2 & 3 controls and the AUX-1 & 2 con-
trols to minimum (0).
MUSIC:
With the AUX-1/2 controls you control the volume of the music sources connected to
the AUX-1/2 inputs. Input MIC-3 can be switched into a music input (position ‘LINE’).
Use control MIC-3 to control the volume,
Microphone:
The MIC-1, MIC-2 and MIC-3 controls control the volume of the microphones connec-
ted to the equal named inputs (see rear of amplifier).
MASTERVOLUME:
Use the MASTER control to adjust the master volume except the volume from the
TEL/EMER input.
TONE CONTROL:
Use the BASS control to amplify (clockwise) or weaken (anti-clockwise) the low fre-
quency signals. Use the TREBLE control to amplify (clockwise) or weaken (anti-clock-
wise) the high frequency signals.
TEL/EMER VOLUME:
Use the control (29) on the rear to control the volume of the telephone / emergency
signal. The MASTER control does not affect this volume.
AUTO MUTE:
As soon and as long there is speach present in the microphone connected to the MIC-
1 input, all other signals, excluding the TEL/EMER input, are being supressed.
CHIME:
When connecting a pushbutton between PIN-4 and PIN-5 of the rear-side DIN socket,
you can generate a DING DONG signal. This pushbutton can be built-in into a
(table)microphone.
