Bedienungsanleitung Alesis MultiMix 12R (Seite 30 von 62) (Englisch)

693707

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Connections

Multimix 12R Reference Manual 19

To another mixer

The main or monitor outputs of the Multimix 12R may be connected to

a larger mixing console. Consult the manual for the other mixer for

more information. If the mixer has "SUB IN" jacks, connect to those.

Alternatively, you may simply connect the MAIN OUT or MONITOR

OUT jacks of the Multimix 12R to two line-level inputs on the other

mixer. If you do, check to see what level those inputs are designed for.

• If the inputs of the other mixer can handle +4 dBu balanced or -2

dBu unbalanced levels, simply connect the [MAIN OUT

BALANCED] outputs to the other mixer's line inputs.

• If the inputs are designed for -10 dBV level inputs (such as most

keyboard and guitar amplifiers, and consumer stereo amplifiers),

connect the [MAIN OUT -10 dBV] outputs to the line inputs of the

external mixer.

If the connection is made properly, the Multimix 12R will not distort

the input of the other mixer. You may need to adjust the input trim of

the other mixer to get the best dynamic range.

To a stereo tape recorder

If you want to record the output of the mixer into a typical stereo

cassette or DAT deck, connect the [MAIN OUT -10 dBV] phono jacks to

the left and right inputs of the cassette deck using a standard stereo

phono-to-phono (RCA) cable.

If your recorder is a professional type with balanced +4 inputs, in most

cases you should connect the [MAIN OUT BALANCED] jacks of the

mixer to the inputs of the recorder.

• If you connect the [MONITOR OUT] jacks to the recorder, the level

will be affected by the [PHONES/MONITOR] level control on the front

panel. However, if you're using the [TAPE IN] jacks to monitor

playback, you run the risk of feedback if you press the MSTR/TAPE

switch while in record mode.

Connections

To an ADAT multitrack recorder

The studio-grade microphone preamplifiers of the Multimix 12R are

designed to rival or exceed the sound quality of external microphone

preamps costing many times more. A basic 8-track digital recording

system with an ADAT-XT and a Multimix 12R is portable, cost-

effective, easy to use, and sonically transparent. There are two ways

to use the Multimix 12R with ADAT: a single mixer with the ADAT

patched into the [INSERT] jacks, or using two Multimix 12Rs, one for

input and another for monitoring.

In-line ADAT recording:

In this hookup method, the ADAT is patched into the [INSERT] jacks

of channels 1-8 as if each track of the recorder were a signal processor

in each channel of the mixer. Since the ADAT is a unity-gain device, it

will not affect the levels going through the mixer. The [TRIM] control

is the only level control for the ADAT inputs; the channel faders, EQ,

and aux sends of the Multimix 12R are used for monitoring and will

not affect multitrack recording levels.

This method is recommended by many audiophiles and engineers,

since there is a minimum of circuitry between the original source and

the recorder. Hooking a Multimix 12R to an ADAT via the [INSERT]

jacks is effectively the same as connecting studio-quality microphone

preamps directly to the input of the tape deck.

NOTE: To hear the microphone or line input signal through the

mixer, the ADAT track must be in RECORD READY or INPUT mode.

See the ADAT manual for more details.

1. Obtain eight "stereo splitter" insert cables from your dealer. These

cables feature a three-conductor TRS ("stereo") 1/4" phone plug at

one end, and split out to two "mono" plugs at the other, as shown

below. If you have an ADAT, use 1/4" TRS to 1/4" mono cables. If

you have an ADAT-XT, use 1/4" TRS to phono cables.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alesis MultiMix 12R Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info