693681
6
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
6
Layer Mode
Layer Mode enables for two different voices to be layered together for a fuller and richer
sound.
To enable Layer Mode:
1. Select the first voice by pressing one of the Voice buttons.
2. Press the Layer button to enter Layer Mode. The button LED will be lit.
3. Press and hold the Layer button and then press a Voice button to select the second voice
you want to play. The corresponding LED will be lit for that voice, and the display will show
the name of the second voice with the indicator R2.
4. Play the keys to hear the two different voices layered together.
To disable Layer Mode, press the Layer button again.
Note: When you are selecting which voices will be layered, the first Voice button you press
will be set as the "Upper" voice, and the second Voice button you press will be set as the
"Lower" voice.
Note: See Voice Volume to learn how to adjust the levels of the Upper and Lower voices.
Split Mode
Split Mode enables you to split the 88 keys into two zones so that you can have two different
voices for each of your hands. For example, you may want the Piano voice for your right hand,
and the Bass voice for your left hand. When Split Mode is enabled, the left hand voice is
referred to as the Split voice.
To enable Split Mode:
1. Select the voice you would like to be in the right-hand zone.
2. Press the Split button to enter Split Mode. The button LED will be lit.
3. Press and hold the Split button, and then press a Voice button to select the Split voice for
the left-hand zone. The corresponding LED will be lit for that voice, and the display will
show the voice name with the indicator L.
4. Play the keys and you will hear that the right-hand and left-hand zones will have different
voices.
To disable Split Mode, press the Split button again. The button LED will turn off when Split
Mode is disabled.
To set the key where the split point between the right-hand voice and left-hand voice occurs,
use the following procedure:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select Split
Point.
2. Press the Function button again to enter the corresponding menu. The parameter will
flash, indicating it is editable.
3. Use the Value Dial to set the value from 1 to 88, or press the key where you would like the
split to occur.
4. After 7 seconds of inactivity, the Display will return to the main screen.
Note: When you are using Split Mode and Layer Mode at the same time, the right-hand zone
of the split will play both of the layered voices, and the left-hand zone of the split will play the
Split voice only.
Note: See Voice Volume to learn how to adjust the level of the Split voice.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alesis Recital Pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info