Bedienungsanleitung Alesis Vmini (Seite 4 von 16) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

693692

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Features

1. USB Port: Use a standard USB cable to connect this USB port to your computer. The computer’s

USB port provides ample power to V Mini. This connection is also used to send and receive MIDI data

to and from your computer.

2. Keyboard: The 25-note keyboard is velocity-sensitive and, in conjunction with the Octave Down/Up

buttons, can access the full range of 127 available MIDI notes.

3. Pitch-Bend: Pressing and releasing these buttons mimics the rotation of a pitch wheel. These pitch

bend buttons are primarily used to bend the notes played on the keyboard up or down. Your software

determines if and how far you can bend the note. The usual setting is two semitones; however, you

should refer to the documentation provided with your software for information about how to change

the Pitch Bend range.

You can also use the V Mini Editor software to edit how fast the pitch will bend. See the V Mini

Editor’s User Guide to learn how to do this.

4. Modulation: Pressing and releasing this button mimics the rotation of a modulation wheel. Use this

button to send continuous controller data—MIDI CC #01 (modulation), by default. This type of real-

time controller was originally introduced on electronic keyboard instruments to give the performer

options such as adding vibrato, just like players of acoustic instruments do.

You can also use the V Mini Editor software to set this button to send a different MIDI CC message to

your software. See the V Mini Editor’s User Guide to learn how to do this.

5. Sustain: Use this button to sustain all currently held notes on the keyboard. In “momentary” mode

(default), the notes will sustain until you release the button. In “switch” mode, the notes will still sustain

after you release the button. Once you press the button again, the notes will stop sustaining.

You can also use the V Mini Editor to select your desired mode, as well as assign the button to send a

different MIDI CC message to your software. See the V Mini Editor’s User Guide to learn how to do

this.

6. Octave Down/Up: Use these buttons to shift the keyboard’s range up or down. When you are higher

or lower than the center octave, the corresponding Octave button will light. Press both buttons

simultaneously to reset the octave shift to “zero.”

7. Pads: Use these pads to trigger drum hits or other samples in your software. The pads are velocity-

sensitive, which makes them very responsive and intuitive to play.

You can also use the V Mini Editor software to edit the MIDI note message set to each pad, or you can

change the pad to send MIDI CC messages or Program Change messages to your software. See the

V Mini Editor’s User Guide to learn how to do this.

8. Assignable Knobs: Use these 270° knobs to send MIDI CC messages to your software.

You can also use the V Mini Editor software to edit the MIDI CC message set to each knob, or you can

change the knob to send MIDI Channel aftertouch messages to your software. See the V Mini Editor’s

User Guide to learn how to do this.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alesis Vmini Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info