Bedienungsanleitung Alfa Romeo 4C - 2015 (Seite 32 von 124) (Englisch)

631110

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

The vehicle can only be launched (from a stop) in FIRST (1st) or REVERSE (R). SECOND (2nd) gear

(or higher) cannot be engaged when the vehicle is stationary.

FIRST (1st) and REVERSE (R) gears can only be engaged at vehicle speeds below 2 mph (3 km/h).

At speeds below 6 mph (10 km/h), attempts to shift from 1st to R (or R to 1st) will only be allowed

if the vehicle speed drops below the 2 mph (3 km/h) threshold within three seconds of the request;

otherwise, the transmission will shift to NEUTRAL (N). The driver should then repeat the request for

1st or R once the vehicle has come to a stop.

Shift Paddles

In MANUAL mode, the steering wheel mounted shift paddles (labeled + and -) control the

transmission shifting.

Tapping the (+) paddle will upshift the transmission to the next higher gear, while tapping the (-)

paddle will downshift to the next lower gear.The cur rent gear is displayed in the instrument cluster.

If a requested shift would cause engine lugging or overspeed, that request will be ignored.

In AUTO mode, tapping a shift paddle will temporarily place the transmission in MANUAL mode, and

execute the requested upshift or downshift (if allowable).The transmission will then return to AUTO

mode after a brief interval. Pressing a shift paddle will only shift the transmission one gear at a

time. Holding a paddle depressed will not command multiple shifts; the paddle must be pressed

multiple times in succession to generate multiple shifts.

If the brake pedal is not depressed (and the car is stationary for a period of time), the transmission

will automatically engage NEUTRAL (N).

Neutral (N)

Use this range when the vehicle is standing for prolonged periods with the engine running . Always

apply the parking brake if you must leave the vehicle.

At engine startup, the transmission will automatically select NEUTRAL (N) and AUTO mode. The

brake pedal must be pressed when starting the engine.

To select NEUTRAL (N) when the vehicle is stationary, turn the ignition key to the MAR-ON position

(engine running or not), press the brake pedal, and press the N button on the transmission gear

selector.

When the vehicle is moving (with ignition ON), pressing the NEUTRAL (N) button will engage N,

regardless of whether the brake pedal is pressed.

WARNING!

Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe

practices that limit your response to changing traffic or road conditions. You might lose control

of the vehicle and have a collision.

With car in motion, to engage a gear from the NEUTRAL (N) position, press the 1 button on the

transmission control panel (it is not necessary to press the brake pedal) the transmission will

immediately engage the correct gear according to the car’s speed.

OPERATING YOUR VEHICLE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alfa Romeo 4C - 2015 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info