3
Useful Functions of the DJ-X3
38
In the Set mode, select the type of antenna.
· In the case of each type of bar antenna, rotate the dial and set ON/OFF.
· In the case of using the earphone antenna, rotate the dial and select either the
earphone antenna or the whip antenna.
Tip
· If each type of bar antenna is set to OFF, the external antenna attached to the
DJ-X3 receives signals for those bands.
· When using the earphone antenna, a signal may be unstable depending on the
position of the earphone cord.
· When using the bar antenna, a signal may be unstable depending on the
frequency and the position of the receiver.
■
Selecting the Modulation Mode
You can select a modulation mode from AM, FM, and WFM.
In the Set mode, select "wAvE."
· Every click of the dial changes the modulation mode as shown below:
AM ➝ WFM ➝ FM ➝ AM...
· "A" appears on the display when you select AM radio, and "W" appears when
you select TV and broadcast FM reception. However, nothing appears when
you select narrow band FM communications radio.
Tip
When the channel step setting is set to AUTO, the modulation mode cannot be
changed.
