Bedienungsanleitung Allen-Heath GL 3300 (Seite 3 von 20) (Englisch)

541351

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

GL3300 U

SER

UIDE

PRECAUTIONS.

ll AC POWER: Check the power unit for correct AC mains voltage setting before switching on.

Allow adequate space around the unit for ventilation.

ll CONNECTIONS: Use audio connectors and cables only for their intended purpose. Do not

connect any source of AC or DC power to the console audio connectors. Do not

connect the output of power amplifiers directly to the console.

ll CLEANING: Avoid the use of chemicals, abrasives and solvents. The control panel is best

cleaned with a soft brush and lint-free cloth. To remove stubborn marks (such

as chinagraph pencil) isopropyl alcohol may be used.

ll LUBRICATION: The faders, switches and potentiometers are lubricated for life. The use of

electrical lubricants on these parts is not recommended.

ll DIRT, DUST, SMOKE and MOISTURE: Prevent damage to the moving parts, such as faders

and potentiometers, and cosmetics by avoiding drinks spill age, tobacco ash and

smoke, and exposure to rain and condensation. Protect from excessive dirt,

dust, heat and vibration.

INTRODUCTION

The GL3300 continues ALLEN & HEATH’s commitment to provide high quality audio mixing consoles

engineered to meet the exacting requirements of today’s audio business. It brings you the latest in high

performance technology and offers the reassurance of over two decades of console manufacture and

customer support.

This user guide presents a quick reference to the function, application and installation of the GL3300. For

further information on the basic principles of audio system engineering please refer to one of the specialist

publications available from bookshops and audio equipment dealers.

Whilst we believe the information in this guide to be reliable we do not assume responsibility for

inaccuracies. We also reserve the right to make changes in the interest of further product development.

SERVICE AND TECHNICAL SUPPORT

Under normal conditions the GL3300 does not require user maintenance or internal calibration. Any

service work required should be carried out by qualified service personnel only.

We are able to offer further product support through our worldwide network of approved dealers and

service agents. To help us provide the most efficient service please keep a record of the console serial

number, and date and place of purchase to be quoted in any communication regarding this product.

Mains electricity is dangerous and can kill. Mains voltage is present within the

power supply unit provided with the console. Do not remove the power unit cover with

mains connected. The correct mains voltage setting is indicated on the rear of the

power unit. Check your mains wiring and earthing before switching on.

DO NOT REMOVE THE MAINS EARTH CONNECTION!

The console chassis is connected to mains earth to ensure your safety. Audio

0V connects to the console chassis internally. Should problems be encountered with

ground loops operate the audio ground lift switches on connected equipment

accordingly or disconnect the cable screens at one end. Refer to the section on

'EARTHING' later in this User Guide.

SAFETY WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath GL 3300 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info