Bedienungsanleitung Allen-Heath GL 4000 (Seite 22 von 54) (Englisch)

541356

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

THE CONSOLE MATRIX - The GL4000 includes a versatile 11 x 4 output

matrix. This comprises four independent outputs each with level control,

ON switch and AFL monitoring. Each matrix mix is created from the

desired combination of group (x8), L (left), R (right) and M (mono) signals.

The level of each source is adjusted using the matrix SEND controls

above the main faders in much the same way as the channel aux sends

are used. The output is selectable to a TRS jack or XLR with insert.

Typical applications of a matrix include:

Additional speaker feeds for zoning and delay fills - The mix

may not be exactly the same as that feeding the LR speakers. For

example, the vocals may be boosted to aid clarity for listeners at the

rear of the venue. It is common to insert a delay unit to compensate

for acoustic delay if the speaker is positioned a significant distance

from the stage. Some EQ may also be required.

Recording - It is seldom adequate to record live to 2-track from

the LR mix. Typically the LR house mix is 'vocal heavy' as much of

the instrument sound is heard acoustically and the PA is used to

supplement the sound. Use two matrix outputs and create a more

balanced mix for the recording using the matrix sends. Here, the

'backline' sound can be boosted on the related group send controls.

Video and Broadcast feeds - The mix may be balanced and

stereo image set as required without affecting the PA mix. Often

a mono broadcast feed is asked for. Set this up by mixing in equal

amounts of the L and R mix.

MATRIX SENDS - These route the group signal to one or more of 4 matrix

mix busses. The source may be selected pre or post group fader. The

level may be adjusted from off to +6dB boost. The normal '0' level is

marked on the control dial. The matrix source is always fed from the

groups even if GRP REVERSE is selected.

MATRIX TO AUX LINK - Aux masters 1 to 4 include this underpanel

mode switch. When pressed this links the related matrix mix (A to D) to

the aux mix. This unique feature lets you extend the aux mix across the

master section so that monitors and effects can be created from the

groups, L, R and M, pre or post fader. Similarly, the aux output may be

used as a matrix created from the master section and with additional feeds

from the channels.

GROUP MASTER - The group mix is normally controlled using the

100mm main fader. If GRP REVERSE is selected this section controls the

aux mix. A pre fader group meter is included to display signal activity and

warn of mix overload. The MUTE switch is part of the console mute

grouping and automation system and includes preview and safe. AFL

monitors the signal post insert and post fader.

SUBGROUPING - The post fader group signal can be routed to the main

L-R and/or M outputs by pressing the switches to the left of the fader. PAN

adjusts the position of the signal between L and R. Routing a combination

of channel signals to a group and then routing the group to the main mix

lets you control the level of the combined signals with a single fader.

Routing and panning to a pair of groups and then panning them L and R

lets you subgroup in stereo. Subgroups are typically used for drum kits,

vocals, stage mics, backline instruments etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath GL 4000 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info