541356
38
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
37
TO DISABLE OR ENABLE QUICKSOLO
Enter CONSOLE MODE by pressing SHIFT +
together.
The display indicates So= (solo on)
While holding SHIFT +
press RECALL
Leave the display set for solo mode on or off :
So= (solo on) or So (solo off)
If you try to use QuickSolo while disabled the display will indicate
OFF and none of the console mutes will be affected.
SOLO SAFES
QuickSolo can mute all the console mutes including channels, aux sends, groups and
main outputs. To hear the effect of soloed channels the required outputs should not
be muted. You may also wish to always hear the effect of signal processing devices
such as reverbs connected to the console aux sends and returns. Here, the aux sends
and channels allocated as effects returns should not mute when solo is activated.
The GL4000 includes a 'solo safe' facility so that selected mutes can be disabled from
the solo system. This works in the same way as the 'mute safes' described earlier but
affects solo and not the mute groups or patches. Any mutes made 'safe' can be
previewed and edited before QuickSolo is activated and without affecting the console
mute status. Solo safe settings are retained on power off and can be archived via MIDI.
MAKE A CHANNEL 'SOLO SAFE'
Press and hold QUICKSOLO
The LED flashes and the console is armed ready for
solo operation. No mutes are affected.
The green SAFE/PREVIEW LEDs show which
channels are already 'solo safe'.
While holding QUICKSOLO press EDIT SAFES
Both the QUICKSOLO and EDIT SAFES LEDs flash
to show that the console is in 'edit safes' mode.
While holding both, press a channel MUTE switch.
The SAFE/PREVIEW LED toggles on or off to show
if the channel will be made safe.
Select all the mutes you wish to make safe.
The SAFE/PREVIEW LEDs will show these every
time you arm or operate QuickSolo.
Release EDIT SAFES to exit 'solo safe' mode ready to
activate QuickSolo, or
Release EDIT SAFES and QUICKSOLO to return the
console to normal operation.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allen-Heath GL 4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info