Bedienungsanleitung Allen-Heath GL2200 (Seite 4 von 28) (Englisch)

541348

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

GL2200 USER GUIDE

INTRODUCTION

The GL2200 continues ALLEN & HEATH’s commitment to provide high quality audio mixing consoles

engineered to meet the exacting requirements of today’s audio business. It brings you the latest in

high performance technology and offers the reassurance of over two decades of console manufacture

and customer support.

This user guide presents a quick reference to the function, application and installation of the GL2200.

We recommend that you read this guide fully before operating the console For further information on

the basic principles of audio system engineering please refer to one of the specialist publications

available from bookshops and audio equipment dealers.

Whilst we believe the information in this guide to be reliable we do not assume responsibility for any

inaccuracies. We also reserve the right to make changes in the interest of further product

development.

SERVICE AND TECHNICAL SUPPORT

Under normal conditions the GL2200 does not require user maintenance or internal calibration. Any

service work required should be carried out by qualified service personnel only.

We are able to offer further product support through our world-wide network of approved dealers and

service agents. You can also access our Web site on the internet for information on our product

range, assistance with your technical queries or simply to chat about audio matters. To help us

provide the most efficient service please keep a record of the console serial number, and date and

place of purchase to be quoted in any communication regarding this product.

GENERAL PRECAUTIONS

Your GL2200 is ruggedly constructed to give many years of reliable operation. However, you will

extend the life of the console and preserve its cosmetics by applying these simple common sense

precautions.

• Avoid storing or using the mixing console in conditions of excessive heat or cold, or in positions

where it is likely to be subject to vibration, dust, dirt or moisture.

• Do not use any liquids to clean the control surface of the console, a soft dry brush or dry lint-free

cloth is ideal.

• Use only water or ethyl alcohol to clean the trim and scribble strips. Other solvents may cause

damage to paint or plastic parts.

• The faders, switches and potentiometers are lubricated for life. The use of electrical lubricants on

these parts is not recommended.

• Avoid using the console close to strong sources of electromagnetic radiation (e.g. video monitors,

high power electric cabling): this may cause degradation of the audio quality due to induced

voltages in connecting leads and chassis. For the same reason, always site any external power

supply away from the unit.

SAFETY WARNING!

Mains electricity is dangerous and can kill. Mains voltage

is present within the console power supply.

Do not remove the power supply cover with mains

electricity connected. To ensure your safety, mains earth

is connected to the chassis through the power lead. Do

not remove this mains earth connection.

To avoid the risk of fire, replace the mains fuse only with

the correct value and type as indicated on the power

supply unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath GL2200 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info