Bedienungsanleitung Allen-Heath GL2800 (Seite 23 von 42) (Englisch)

541345

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

GL2800 User Guide 23

2-TRACK REPLAY and CONSOLE MONITOR

2TRK REPLAY

A stereo source such as a recording playback or

walk-in CD can be routed directly to the main LR mix. Adjust its level

from fully off to +10dB gain using the rotary control. You can check

the source on the meters and in the headphones before bringing it

into the mix by selecting the 2TRK monitor switch.

Console Monitor

Comprehensive engineer’s headphones and

local monitoring is provided. Select the source from the monitor

select switch bank. Pressing PFL or AFL elsewhere on the console

automatically overrides the current monitor source with the signal from

the channel or master selection. The red PFL/AFL active indicator

illuminates and the console meters display the active signal.

The console monitor meters provide 12 LED indicators to accurately

display the signal level of the selected monitor source. Reduce the

gain or level if the red ‘+16’ peak indicator lights. For optimum

performance the signals should be adjusted to read an average ‘0’

with loudest peaks reaching around ‘+6’.

Use the MONITOR level control to adjust the level in the headphones

and local speaker monitor. We recommend you use closed ear

headphones in the range 30 to 600 ohms designed for live sound

monitoring. 100 ohm headphones are a popular choice.

Three headphones sockets are provided for convenience. One ¼”

standard TRS is at the front

under the armrest, a second at the top

near the talkback mic. A small 3.5mm socket is also provided for

plugging in headphones or earpieces fitted with a mini jack. It is useful

to monitor an in-ear mix using the same type of earpiece as used by

the performers.

WARNING: To avoid damage to your hearing do not

operate any close-to-ear monitoring such as headphones for long

periods at high volume. Continued exposure to high volume

sound can cause frequency selective or wide range hearing loss.

Stereo Monitoring The GL2800 has been designed to offer

maximum capability for working with multiple stereo mixes such as

IEM and recording feeds. It is important to be able to hear exactly

what you are sending from the console. Press AUX 9-10 to check the

stereo aux mix. Press one switch to check a matrix in mono, two to

check a related pair in stereo. For example, press MTX1 to listen to a

mono fill mix, or press MTX1 and MTX2 together to listen to a stereo

recording mix.

Monitor Selection With all select switches in the up position, no

source is monitored unless PFL or AFL is activated. Press a switch to

select the required monitor source. Press two together to select stereo

as described above. Switches nearer the faders take priority. For

example, press L-R to listen to the main mix. Then press 2TRK to

override the L-R source until it is released.

POWER

-3

-12

-16

-30

-20

-9

-6

+16

+10

2TRK

TO LR

2TRK REPLAY

1-2

AUX

3-4

AUX

5-8

AUX

9-10

AUX

MTX3-4

MTX1-2

LATCH

L-R

MAXMIN

TALKBACK

OSC/NOISE

TALK

L-R

9-10

MONITOR

2TRK

AUX

MTX4

MTX3

MTX2

MTX1

100

PFL/AFL

MONITOR

STEREO

+10OO

9-10

AUX

1kHz OSC

PINK NOISE

PHONES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath GL2800 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info