Bedienungsanleitung Allen-Heath GLD Digital Audio Mixing System (Seite 19 von 32) (Englisch)

541367

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

GLD User Guide 19 AP8561 iss.2

Template Show settings

There are three Template Shows available. These have the following settings:

 SoftKey assignments are Scene Safe

 SoftKeys 1-8 = DCA mute 1-8

 SoftKey 9 = PAFL Clear All

 SoftKey 10 = FX4 tap tempo (FOH only)

 Scene Confirmation = On

 Global Direct Out = post-delay, pre-fade, post-mute

 Monitor Port = ME-1 mode

 I/O Port out = input socket 1-48

 PEQ = 20-20kHz, Curve Fill = On

 Auxes are post-PEQ, pre-fade (monitors)

 FX are post-fade (effects)

 USB playback assigned to CH47/48

 USB recording from LR via stereo Matrix1

The Template Show ‘Board Reset’ Scene Each Template Show provides a Scene called

'Board Reset'. This resets the GLD settings to the starting point default for the loaded Template Show.

The Board Reset Scene is available in position 1 and duplicated in position 500 for backup.

Use this Scene to instantly reset parameters without affecting the mix configuration, user preferences or

the other Scenes. You can edit its Recall Filter to protect parameters you do not wish to reset. For

example, you could set the filter to protect the patchbay and master strip assignments in a festival

situation.

Note You can also set Scene Safes to protect selected parameters for all Scenes, for example to remove

the SoftKeys from Scene recall.

When creating your own User Show from a Template Show you can choose to overwrite the Scene 1

contents with your preferred settings, rename it, write in a description, set its Recall Filter to reset selected

parameters, or simply delete it. You can still access the default Board Reset using Scene 500 if needed.

Template1 LR

This Template configures a traditional

architecture and layout with stereo LR

main mix for mixing FOH and Monitors

from FOH:

LR stereo main mix

4 Groups (2 stereo)

8 Auxes (6 mono, 1 stereo)

8 FX (4 assigned to strips)

6 Matrix (2 mono, 2 stereo)

16 DCA / Mute groups

Talkback using mic socket 44

USB playback to CH47/48

Recording from stereo Matrix 1

25 26 27 28 29 30 31 32

33 34 35 36 37 38 39 40

G1 G1

LRG2 G2

M1 M1 M2 M2

41 42 43

Talkback

RM2 LR

45/6

LRss

LRss LRss

GLD-80

AR84

AR2412

dSNAKE EXPANDER I/O Port

In = not patched

Out = IP Skt 1-48

2 3 4 9 10 11 12

14 15 16 21 22 23 24

5678

17 18 19 20

1234 56 LR

1234 561

1234 1234

DCA

Aux

FX return FX send

LR 1212

Grp Mtx

26 27 28 33 34 35 3629 30 31 3225

38 39 40 45/6USB41 42 4337

Alt View

Fader Bank 1 Fader Bank 2

Custom Rotary 2

Custom Rotary 1

not assigned

Channel number

PAFL Clear

Tap tempo

DCA mute

all Pre-fade

4= Delay

for digital mic split

Direct Out = Post-Delay, Pre-fade, Post-Mute

Talkback from Input 44 and assigned to all Aux sends

LRss

USB Playback assigned to Channel 47/48

USB Recording from LR via stereo Mtx 1

DIGITAL

USB

Playback Record

Rec

Default = Pan

Monitor Out = ME-1 mode

PEQ = 20-20kHz, Curve Fill = On

Scene Edit Confirmation = On

SoftKeys are Scene Safe

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath GLD Digital Audio Mixing System Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info