Bedienungsanleitung Allen-Heath iDR-64 (Seite 3 von 12) (Englisch)

541386

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

iDR MixRack Getting Started Guide 3 AP7445 iss.3

Introduction

iLive is a state of the art system of components providing a uniquely flexible solution dedicated to live

sound mixing and associated applications. It separates the mix engine from the control surface putting

the audio and the DSP where it is needed near the stage, and offering a host of control and audio

networking possibilities. Refer to the Allen & Heath web site to find out more about the iLive system.

The MixRack is the heart of the system. It is the mixer itself complete with audio sockets, DSP to process

the audio, and control and audio networking ports. The MixRack is typically connected to one of the

many iLive Surfaces available, but can also be controlled at the same time as or even without a Surface

using a laptop running the iLive Editor software, or preconfigured to run with PL Series remote controllers.

Walking the stage with a wireless laptop or touch tablet opens up a whole new world of mixing…

 Distributed system – Separate MixRack (DSP) and Surface (controller)

 Network, wireless laptop, touch tablet control

 Editor software for online or offline PC/Mac control

 System can be run without a Surface using laptop only

 Choice of 6 MixRacks (DSP only, modular, 16, 32, 48, 64 mics)

 Mix and match any combination of MixRack and Surface

 Digital snake for local audio at the Surface – ACE™ single CAT5 up to 120m

 Port B audio network option for digital mic splitting and system linking

 Choose from ACE™, ES, MADI, ADAT, Aviom™ and more

 64x32 RackExtra DSP engine with 8 stereo FX processors

 32 buses can be configured as mono/stereo groups, auxes, mains, matrix

 Main mix types – none, M, LR, LCR, LCRplus, LRSub, LCRSub and more

 Unique Sub main mix mode for instant access to separate sub bass level

 Monitor mix capability with engineer’s Wedge and IEM monitors

 64 channels configurable as mono or stereo

 Two MixRacks can be linked in Dual-Rack mode to provide 128 input channels

 Up to 72 sources to the mix including FX returns (136 in Dual-Rack mode)

 3 Dynamics, PEQ, HPF and Delay on all 64 inputs

 2 Dynamics, PEQ, 1/3 octave GEQ and Delay on all 32 mixes

 8 Stereo FX with dedicated returns, PEQ and DFX Shaper

 FX emulations of popular industry standard devices

 Input, output and insert soft patchbays

 Up to 8 channel Gangs with choice of which parameters to link

 16 DCAs with DCA or Mute Group mode

 Built-in signal generator and RTA

 User definable channel names and colours

 Libraries, Scenes and Show memories with USB transfer and Scene filter

 Firmware and memories compatible across all models



Store all or selected items in Scene memories

 Get started quickly with built-in Template Shows

 8 Password protectable User Profiles

 Compatible with Allen & Heath PL remote controllers and iDR Series

 MIDI interface at both the MixRack and Surface

 High performance, recallable mic/line preamps

 Digital +/-24dB Trim for FOH/Monitor gain sharing

 Low latency, low noise, very high preamp and mix headroom

 Relay protected outputs

 Redundant backup PSU capability

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath iDR-64 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info