Bedienungsanleitung Allen-Heath MixWizard Series WZ20S (Seite 30 von 32) (Englisch)

541378

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

30 WZ20S User Guide

Options

The WZ20S is designed to offer the utmost flexibility to satisfy your application without

modification. However, the following internal options are provided to allow customisation

to satisfy the more specialist applications. This work requires access to the internal

assemblies and resoldering of circuit card links and should be carried out by competent

technical personnel only. Further information and details are printed in the WZ20S

Service Manual, available from your service agent, or by contacting ALLEN & HEATH

technical support.

Internal Configuration Link Options

Mono channel AUX options The pre-fade sends are set post-EQ, post-ON as

standard. Links on the mono circuit cards can be resoldered to reconfigure pre-

EQ and/or pre-ON as required.

Stereo channel AUX options The stereo channel aux sends sum the channel

left and right signals as standard. Links can be resoldered so that the left signal

feeds sends 1, 3, 5, and the right feeds 2, 4, 6. One pair of links affects all pre-

fade sends, another all post-fade.

Mono channel DIRECT outputs These are sourced post channel fader as

standard. A link on each card can be resoldered to reconfigure pre-fader. The

direct out pre-fade source is the same as that configured to feed the aux sends.

EXT input level option The external inputs are set for -10dBV line level as

standard. These can be reconfigured for +4dBu operation by cutting track links

on the connector card.

DIM switch function The DIM switch is set to mute the local monitor as

standard. This can be reconfigured to attenuate the signal by 20dB by cutting a

pair of track links on the right master circuit card.

Remote control of the DIM function The right master circuit card provides

solder pads to wire to the 25 pin REMOTE connector so local monitor DIM can

be activated by an external switch. Alternatively it can be wired to a mono card

so that pressing ON, PFL, or raising a switched fader can automatically mute

the signal. This can be used to mute the studio loudspeakers when the

presenter is on-air or checks his own microphone using PFL.

REMOTE user connector The blanking plate may be replaced with a standard

25 pin chassis mount female D-connector for custom wiring.

Internally Fitted Option Kits

SYS-LINK output The blanking plate can be replaced with a 25 pin D-

connector with circuit card. This provides access to all the console outputs and

is compatible with any ALLEN & HEATH console already fitted with the SYS-

LINK expander system.

RIAA option Up to three dual RIAA preamp circuit cards can be wired to the

connector assembly for direct connection to magnetic cartridge turntables. Each

card provides two stereo channels.

Switched fader option The standard mono and stereo faders can be

replaced by high grade Alps K-faders with fitted micro switches. These can be

wired to the 25 pin user connector to provide a remote start facility.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath MixWizard Series WZ20S Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info