Bedienungsanleitung Allen-Heath ML-5000 (Seite 33 von 60) (Englisch)

541360

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ML5000 User Guide 33

F5 G1 TB ENABLE. Press these to enable

talkback to any combination of grp/aux master

outputs. When selected, pressing the TALK TO TB

switch S6 routes the talkback mic signal, or

pressing the OSC/NOISE TO TB switch Q3 routes

the osc/noise generator signal to the output. When

not selected, pressing these switches does not

affect the output. The talkback and osc/noise

signals are routed pre-insert.

F6 G2 MUTE. This momentary action switch

turns the grp/aux master signal on or off. The

master can also be muted by the mute groups, VCA

group mutes, snapshot memories, solo-in-place and

MIDI note on/off messages. The switch illuminates

when the signal is muted.

The switch also functions as a solo select when the

console is in SIP mode, and as an edit key when in

EDIT GROUPS or EDIT SAFES mode. The mute

status is always displayed on the switch regardless

of mode.

F7 G3 SAFE / EDIT. This green LED has a

different function according to console mode:

Normal The LED lights when the master has been

made safe from the snapshot and MIDI automation.

Solo-in-Place The LED lights when the master

has been made safe from solo-in-place.

Edit Safes Indicates that the master is safe from

the automation when entered from normal mode, or

safe from solo-in-place when entered from SIP

mode.

Edit Groups The LED lights to indicate that the

master is assigned to the mute group.

Preview Snapshots The LED lights to indicate

that the master is muted in the snapshot memory

being previewed.

F9 G5 MIX METER. The 5 LED bar meter

displays the post-mute, pre-fade mix signal level.

SIG lights to display signal presence at –26dB, -6, 0

and +6 display normal signal level, and PK (peak)

lights when the signal is within 5dB of clipping. PK

senses the signal pre and post-fader to warn of

potential overload.

If the red PK LED lights check the channels feeding

the mix for correct operating level and reduce the

input level if necessary. You can use VCA groups

to simultaneously control the level of more than one

channel. Also check inserted processing for

correct operating level.

F8 G4 AFL. Press this switch to listen to the

master signal in the headphones or engineers

monitor without affecting the main outputs. The

signal is monitored post-insert, post-fader, pre-mute

so that any adjustments made to the faders or

inserted processing such as EQ can be checked.

The ML5000 intelligent P/AFL system provides the

following operating capabilities:

Mono or stereo AFL. Press a single AFL switch

to listen to that master as a mono signal fed to both

left and right channels of the headphones and local

monitor. Press two related AFL switches together

to listen to a related pair in stereo, ideal when

checking in-ear monitor mixes. The odd number

master is fed to the left channel, even to right.

Latching or momentary action. The switch

provides latching or momentary action depending

on how long it is held down. Press and hold for

longer than 1 second for momentary action.

AFL override monitor. Pressing any master AFL

automatically overrides the currently selected

monitor source. Releasing AFL restores that

selection.

PAFL override AFL. Pressing any channel PAFL

overrides the current AFL selection. Releasing

PAFL restores AFL.

AFL cancel PAFL. Pressing an AFL while one or

more PAFL is selected cancels that PAFL selection

and selects the AFL.

Auto cancel or Add mode. The master section

ADD MODE switch P1 determines if pressing a

channel PAFL cancels or adds to any previous

selection.

Clear all. Pressing the master section CLEAR ALL

switch P3 turns off any PAFL / AFL switches

selected and restores the monitor source.

F10 G6 FADER. A 60mm smooth travel K-

fader is fitted providing +10dB gain above the

nominal 0dB operating position. These faders

control the output level of grp/aux 1-16 and are not

part of the console VCA group system.

F11 G7 IDENT STRIP. Identifies the master

numbers and provides a write-on area. The use of

low adhesion artist or masking tape is

recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath ML-5000 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info