Bedienungsanleitung Allen-Heath ML-5000 (Seite 41 von 60) (Englisch)

541360

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ML5000 User Guide 41

L MUTE GROUPS

Mute Groups Explained

A mute group lets you turn a selected combination

of channels on or off with a single key press. The

mute group key acts as a remote control for the

assigned channel mutes.

Mute groups are edited by selecting edit groups

mode and using the channel MUTE switches to

assign channels to the group. The assignment is

edited or viewed one group at a time. All mutes in a

group can be turned off (cleared) or turned on (set)

using the shifted recall function.

The ML5000 has 8 mute groups. You can select

more than one group at the same time. VCA group

mutes cannot be assigned to the mute groups.

Mute group settings are not stored as part of the

console snapshot memory system. However,

channels which have been muted by a group and

have not been made safe from the automation will

be stored.

L1 EDIT GROUPS. Press this switch to put the

console into edit groups mode. The red LED

flashes to warn that the console is in edit mode.

Press at any time while the LED is flashing to

restore normal operating mode. All the group

MUTE LEDs L2 and channel SAFE/EDIT LEDs

D3 turn off when edit mode is first entered. This

means that no group is selected for editing.

Only one group may be edited at a time. The

current assignments for the selected mute group

are displayed on the channel SAFE/EDIT LEDs.

L2 MUTE GROUP. Press one or more of these

momentary action switches to mute the channels

assigned to them. The switch illuminates when the

group is selected. Press again to turn the group off.

Note that you can release and reselect the assigned

channel mutes while the group is on.

To Assign a Mute Group

Press EDIT GROUPS L1 . Next, press the MUTE

switch L2 for the group you want to edit. Both

switches flash. The channel SAFE/EDIT LEDs D3

display which channels are currently assigned to

the group. Now press the channel MUTE switches

D2 to toggle channels in or out of the group. Press

EDIT GROUPS again to exit edit mode, or press

another group switch to edit a different group.

To clear all channels in a Mute group

While in edit mode, hold down SHIFT M9 and

press RECALL M7 . The recall switch flashes and

the display flashes CLr. Release shift and press

RECALL again to confirm. All channel SAFE/EDIT

LEDs turn off indicating that the group is cleared.

To assign all channels to a Mute group.

While in edit mode, hold down SHIFT M9 and

press RECALL M7 two times until the display

flashes SEt. Release shift and press RECALL

again to confirm. All channel SAFE/EDIT LEDs turn

on indicating that all channels are assigned.

Using Mute Groups

Applications include muting groups of instruments,

unused channels when mixing different bands, all

channels except walk in music before the show

starts, all effects, a bank of radio mics during an

instrumental number, stage mics during a scene

change, and so on.

EDIT

GROUP

SELECT GROUP TO EDIT

MUTE

ASSIGN USING CH MUTES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath ML-5000 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info