Bedienungsanleitung Allen-Heath ML-5000 (Seite 57 von 60) (Englisch)

541360

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ML5000 User Guide 57

Archiving the Console Settings

The console settings can be saved to an external

device such as a MIDI sequencer or data archiver

using the dump out facility. Saved settings can be

loaded back into the console using dump in. This is

ideal when you want to archive the settings to use

at a later date, for example a re-run of a previous

performance. You can also use the dump facility to

program additional ML5000 consoles, for example

when setting up duplicate shows or swapping

consoles around. Simply link MIDI OUT from one to

MIDI IN of the other and action the dump out facility.

Settings which are archived :

9 Current mute settings

9 Current Mute group assignments

9 Current VCA group assignments

9 Automation safes

9 Solo-in-Place safes

9 All snapshot memories

Settings which are not archived :

8 Current console operating mode

8 Current PAFL selection and settings

8 Store and auto-increment on/off

MIDI Dump Out

Connect the console to a suitable MIDI archiving

device. Set the same MIDI channel number on

both. Check the rear switch is set to MIDI. Hold

down SHIFT M9 and press STORE M4 . The

console dumps the current settings and memory

contents using a SysEx message string. During this

time dPo is displayed. Note that this operation

can take up to 10 seconds during which time the

console mutes, assignment, SIP and P/AFL

operations will be interrupted.

MIDI Dump In

Connect the console to the MIDI archiving device.

Set the same MIDI channel number on both. Check

the rear switch is set to MIDI. Start the process

using the MIDI archiver. The console current

settings and memory contents are overwritten.

During this time dPI is displayed. Note that this

operation can take a while during which time the

console mute, assignment, SIP and PAFL

operations will be interrupted.

If you are using a MIDI sequencer to record the

dump out data string then make sure you play it

back at the same speed you recorded it. If you

dump it back into the console faster than it was

recorded some data may not load correctly.

MIDI Dump Message Format

The format for dump out and in is identical. The

dump data string is made up of multiple System

Exclusive messages (known as packets) which

contain the console information.

Transmit and Receive. The format for a single

packet is as follows:

F0 <SysEx header> <packet type> <packet

number> <data> <checksum> F7

<SysEx header> = 00 00 1A 50 07 VV vv nn

Where VV = software version number – unit

vv = software version number – decimal

nn = console MIDI channel number

<packet no.> = packet number from 0 to 127

<data> = block of console data (7-bit format)

<checksum> = checksum to allow error detection

MIDI Dump Errors

If the console or connected equipment fails to

respond to a MIDI dump then check:

• The MIDI cable is good and correctly plugged

• The same MIDI channel number is selected

• The rear panel switch is set to MIDI

• Try again

If a data error is detected during a dump out or in

the console display will show an error message

code:

Er1 Buffer overflow

Er2 Packet out of sequence / missing

Er3 Checksum error / corrupt data

Er4 Invalid packet length

Er5 Input timeout

Er6 Unsupported block type

Er7 Invalid scene number

Er8 Block size error

Allen & Heath ML4 Archiver

The ML5Archiver Windows™ utility for the PC can

be downloaded from the Allen & Heath Internet site.

This can be used to archive data to and from the

PC via MIDI or RS232.

Check the Allen & Heath Web site for further details

and loading instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath ML-5000 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info