Bedienungsanleitung Allen-Heath WZ12 mixwizard (Seite 20 von 28) (Englisch)

541347

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

WZ16:2DX

AND

WZ12:2DX U

SER

UIDE

UAL

ODE

The effects processor provides two independent stereo effects programs. The first from Aux 5 and the second

from Aux 6.

The effects programs available to Aux 5 correspond to programs 1-8 in the following list and those available to

Aux 6 are described in programs 9-16 below:

PROGRAM 1-8 PROGRAM 9-16

# NAME EFFECT # NAME EFFECT

1 Stage 9 Stage As effect #1

2 Room 10 Room As effect #2

3 Hall 11 Hall As effect #3

4 Plate 12 Slap Dly 100ms delay

5 Chamber 13 Delay 200ms stereo delay

6 Cathedral 14 Echo Stereo echo

7 Arena 15 Chorus Ideal for guitar chorus

8 Gated Rev

These effects are similar to

those in Single Mode

16 Phaser Instrument/vocal phaser

SELECT – This switch is used, in conjunction with the LED column, to choose the effects programs on auxes 5

and 6 in turn. For each aux, the select switch steps through the eight programs and then OFF before cycling

back to the first program of the eight.

BANK – This switch and associated LED selects the aux 5 effect or the aux 6 effect.

MIDI F

UNCTIONS

The MIDI in socket provides the capability for selecting between FX programs via MIDI. MIDI program change

numbers 0 to 15 correspond to effects programs 1 to 16.

MIDI Channel Change

- The MIDI channel of the mixer may be selected by holding down the BANK key on

power up. Whilst continuing to hold the BANK key, use the SELECT key to step through channels 1-16. The

FX1-8 LEDs will light in sequence to indicate MIDI channels, then the BANK LED will light in conjunction with

these to show 9-16. After cycling through MIDI channels 1 to 16, the processor will then turn all channels on

and then all off. Release both BANK and SELECT keys when the required MIDI status is selected. The BANK

LED will flash twice to confirm channel change.

The factory default is channel 1.

RESET -

Holding down the SELECT key during power up performs a hard RESET. The 8 FX program LEDs

will flash in sequence followed by the BANK LED flashing off then on.

This restores the effects programs to the

factory default settings.

RESTORE

– Hold down the BANK and SELECT keys while powering up the mixer. The 1-8 program LEDs will

flash in sequence followed by the BANK led flashing twice to confirm the operation.

This restores the MIDI

channel and effects programs to the factory default settings.

IZARD

FX’

YSTEM

MIDI S

PECIFICATION

ROGRAM

HANGE

ONTROL

HANGE

CC N

UMBER

1-16 FX Select in single FX mode

1-8 FX A Select in dual FX mode

9-16 FX B Select in dual FX mode

100 FX bypass

101 Exit FX bypass

110 Single FX mode

111 Dual FX mode

112 Wizard front panel disable

113 Wizard front panel enable

16-19 FX1 Param 1-4

20-23 FX2 Param 1-4

24-27 EQ Param 1-4

28-29 NG Param 1-2

31 FX Type

48, 01 Store FX Settings (send twice to confirm store)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath WZ12 mixwizard Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Allen-Heath WZ12 mixwizard

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info