Bedienungsanleitung Allied Telesis AT-9724TS (Seite 23 von 197) (Englisch)

541393

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

Figure 4- 2.Command Prompt

Note: The first user automatically gets Administrator level privileges.It is recommended to create at least one Admin-level user account for the

Switch.

4-7 Password Protection

One of the first tasks when settings up the Switch is to create user accounts.If you log in using a predefined administrator-level user name,you have privileged

access to the Switch's management software.

After your initial login,define new passwords for both default user names to prevent unauthorized access to the Switch,and record the passwords for future

reference.

To create an administrator-level account for the Switch,do the following:

At the CLI login prompt,enter create account admin followed by the <

user name> and press the Enterkey.

You will be asked to provide a password.Type the <

password> used for the administrator account being created and press the Enter key.

You will be prompted to enter the same password again to verify it.Type the same password and press the

Enter key.

Successful creation of the new administrator account will be verified by a Success message.

Note: Passwords are case sensitive.User names and passwords can be up to 15 characters in length.

The sample below illustrates a successful creation of a new administrator-level account with the user name "newmanager".

AT-9724TS:4#create account admin newmanager

Command: create account admin newmanager

Enter a case-sensitive new password:********

Enter the new password again for confirmation:********

Success.

AT-9724TS:4#

ƽ Caution: CLI configuration commands only modify the running configuration file and are not saved when the Switch is rebooted.To save all your

configuration changes in non

olatile storage

you must use the save command to copy the running configuration file to the startup configuration.

4-8 SNMP Settings

Simple Netw

ork Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) designed specifically for managing and monitoring network devices.SNMP

enables network management stations to r

ead and modify the settings of gateways,routers,switches,and other network devices.Use SNMP to configure system

features for proper operation,

monitor performance and detect potential problems in the Switch,switch group or network.

Managed devices that suppor

t SNMP include softwar

e (r

erred to as an agent),which runs locally on the device.A defined set of variables (managed objects) is

maintained by the SNMP agent and used to manage the device.These objects are defined in a Management Information Base (MIB),which provides a standard

presentation of the information contr

olled b

y the on-boar

d SNMP agent.

SNMP defines both the f

ormat of the MIB specifications and the pr

otocol used to

access this information over the network.

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allied Telesis AT-9724TS Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info