541394
38
Zoom out
Zoom in
Vorherige Seite
1/58
Nächste Seite
38 AT-AR256E v3 - 4 Ports ADSL2/2+ Router - User Manual
Field Description
Interface Select the WAN interface to configure the QoS for outgoing packets; LAN interface cannot be
selected as VLAN is currently supported on the WAN side only.
Unclassified
Packet
Some locally generated packets might not have been classified and thus do not have a CoS
value, such as PPP control packet and ARP packet. You can define the CoS for all unclassified
outgoing packets on layer 2 using this field, which will then pick up the user priority bits based
on the mapping rules you create. The selections are (in the order of descending priority):
CoS1, CoS2, CoS3, CoS4, CoS5 and CoS6. The default value is CoS1 (recommended).
Class of
Service
The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5 and
CoS6.
User Priority The selections are 0, 1, 2, 3, 4, 5, 6 and 7.
Layer 3Egress
Egress Layer 3 enables you to map CoS to ToS so that the priority marking of outgoing packets can be
carried over to the IP network.
Figure 29: Layer 3 Egress
Field Description
Interface Select the WAN interface to configure the QoS for outgoing packets; LAN interface
cannot be selected as VLAN is currently supported on the WAN side only.
Default
Non-IP
Locally generated packets (such as ARP packets) do not have a CoS marking. You can
define the CoS for all unclassified outgoing packets on layer 3 using this field. The
selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5 and
CoS6. The default value is CoS1 (recommended).
Class of
Service
The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5
and CoS6.
Translated
TOS
The Type of Service field takes values from 1 to 255. The selections are 0, 1, 2, 3, 4, 5, 6
and 7.
Ingress
Ingress enables you to configure QoS for packets as soon as they come into the router. The domain
mappings are converted to CoS (the common language) so that the priority marking is carried over.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allied Telesis AT-AR256E v3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info