Infrared Forehead
Thermometer
Model:UFR106
Instruction manual
Introduction
▲Y-
ogy to measure temperature instantly and accurately on the forehead or object.
▲Easy to use and less measurement time
This
and
easy to check
reading.
▲Body and object modes
This thermometer supports to -
ing
to take body temperature, it also supports to take the surface temperature of
object as below
Surface temperature of milk in the bottle;
Surface temperature of baby bath;
Environment temperature.
▲Color visible indication of alarm and alarm sounds
When body
alarm sounds for 10 times.
▲Memory function
It stores up to 20 sets recent measurement data.
▲Auto power off
Automatically power off if left idle for
▲Measurement
Measurement
1~3cm.
Please
reference.
▲Intended use :
The Infrared Thermometer is intended for the intermittent measurement and
monitoring from forehead or device is
indicated for use by people of all ages at homecare and in hospital.
Safety Information
T
be followed including the warning and the caution listed in the instruction
manual :
WARNING:
injury or death.
CAUTION: This alert identifies hazards that may causeminor personal injury
product damage, or property damage.
T
Manufacturer
Direct current
Follow instructions for use
CAUTION: Consult accompanying documents
Specifies serial number
SN
The
accessories. Some of the symbols
the device and its use.
Symbol descriptions
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary
This thermometer is not intended to substitute for a consultation with your
physician.The forehead scan temperature serves as a reference only It
cannot be a judgment on fever
Basic safety precautions should always be observed, especially when the
thermometer is used on or near children and disabled persons.
Please place the device unreachable by young.
Avoid direct sunlight.
Do not touch the lens.
No modification of this device is allowed.
The
on may cause the suffocation. .
Please
treat is gently and prevent the falling from a high place.
Please do not immersed it in liquid.
Never leave
they may leak and cause damage to the unit.
Please
with new batteries if the unit display a low battery symbol.
Do not mix the old and new batteries together
Do not use during the transportation.
Product Structure
Battery Installation
Setting Mode
Classification
-Body
Celsius/℃ Fahrenheit/℉
-Display
W
1. Internally powered equipment;
2. T
3. Protection against ingress of water or Particulate matter: IP21;
4. Not category
5. Mode of operation:Continuous operation.
The user must check that the equipment functions safely and see that it is in proper
working condition before being used.
Do of as waste,
separate
regarding the collection systems available. If ele are
disposed
groundwater -
ing.
Remove the battery cover from the battery compartment,insert the battery
1. -
ment as the arrow direction accordingly
2. Insert
and ensure each battery is in the proper direction,
Positive
of battery cover
3. Close the battery cover
Low battery and replacement
When
work, and you must replace with new batteries, otherwise the unit can' t work.
Battery type and replacement
Please use 2pcs
Do not use the batteries beyond their expiry date.
Please remove the batteries if you do not need to use for long time.
Dispose of the battery in accordance
avoid fire and explosion hazard, do not burn or incinerate the battery
W
How T
1. Mode setting:
Press SET Button when power on after you hear 1 beep, the screen will display
will ,
Object Mode automatically when you switch to . Then Mode setting is finished.
2. Unit setting:
Long
display
pressed.It , and
confirm the Fahrenheit Unit automatically when you switch to . Then press
ST
completed, it will automatically enter the sound switch setting mode.
3. Sound switch setting:
Enter
flashes,
selection.
Note: The Body Mode is
is used to measure the object temperature.
Body mode Object mode
1.
3. Display Screen
4. SET Button
5. MEM Button
6. ST
7. Battery Cover
2. 2-Color LED
Proper Use Of The Unit
T
Pre-measurement
Note: Body T
website: http://firstaid.webmd.com/body-temperature;retrieved at 2010 Jan 7.
About Normal Body T
The temperature in the forehead and temple area differs from the internal
temperature,
constricts
of
may
own perception
As a reference, you also measure the internal body temperature using a
conventional oral or rectal thermometer
Body temperature can vary from one individual/person to next.
It also
normal ranges from different sites.
Please
same time, should not be directly compared. Fever indicates that the body
temperature
overdressing or immunization. Some people may not experience fever even
when they are ill.
These include,
with compromised immune systems, persons taking antibiotics, steroids or
antipyretics
illnesses. Please
fever
Note:
●If ＜ 37.5°C(99.5°F
beep.
●If is≥37.5°C(99.5°F)and＜ 43°C(109.4°F), display will together
red LED and 10 short beeps.
●Only after the unit °C/°F start to flash again, it can continue to take measurement.
●As forehead temperature
surroundings, the reading shall be taken as a reference only
●If
affected by surrounding temperature.
●Babies' not
temperature with the non-contact thermometer
temperature maybe lower than the internal body temperature.
1).Press
display you can hear 1 short beep, then unit °C/°F on the
display start to flash.
2).Press the
unit flashes.
3).Move
is flat
Press -
ment.
4).The
been
the reading will appears on the display with green LED blinks.
As a Body Thermometer
尺寸：440*290mm 材质：80g书纸 单黑 折页（风琴折再对折）
切线 折痕线
