574292
19
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
18 Electronic Viewnder
L(Y)Zone Check
L(Y’)Z o n e A d j
Range Error
Y’ Max
Y’ Min
C Max
C Min
Y’ Pic Blink
C Pic Blink
Waveform
W/F Intensity
W/F Trans
Off
75%
Off
255
0
255
0
Off
Off
Off
0
Opaque
WAVEFORM / ERROR CHECK
Range Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in WaveForm/VECTOR.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN shall blink.
* See section “6. Other Function [5] Range
Error” for more information.
• Y’ Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen.
Y’ Min
- Used to set the minimum luma(Y) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen.
C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the max C’ level
will blink in the screen.
C Min
- Used to set the minimum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen.
Y Picture Blink
- Used to set whether or not to blink pixels with
values exceeding Y MAX and Y MIN.
C Picture Blink
- Used to set whether or not to blink pixels with
values exceeding C MAX and C MIN.
L (Y) Zone Check (Luma Zone Check)
- Displays the Luma(Y) level of the input image
with specic colors.
- Each pixel’s Y’ is analyzed and changed to a
specic color according to the Index
on the right side of the screen.
* See section “6. Other Function [3] L(Y)Zone
Check” for more information.
- When a pixel’s Y’ level is under 0%(16), the
color /diagonal line will be colored Green.
- When the pixel’s Y’ level is over 100%(235),
the color / diagonal line will be colored Red.
- When the Y’ level of a pixel is between
0~100%, the pixel is displayed with Gray,
except for selected Luma Zone.
- A 5% zone of the selected Y’ level will be
colored Pink(5%) and ±10% will be colored
Yellow(-10% from Pink) and Cyan(+10% from
Pink).
L (Y) Zone Adj. (Luma Zone Adjust)
- Used to set the Y’ level to be colored Yellow,
Pink and Cyan simply by scrolling the Rotary
Control.
- Available values are 0 ~ 100%.
6. Menu Operations
[4] WAVEFORM & ERROR CHECK
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alphatron EVF-035W-3G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info