Bedienungsanleitung Alpina 10672z (Seite 7 von 16) (Holländisch)

820798

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

weigh

Put the appliance on a ﬂat and stable surface. This kitchen scale

has sensor touch control. The keys are activated by the touch

of a ﬁnger. The sensor touch control functions also with the lid/

bowl on the scale.

Switch the scale on by touching the ON/OFF/TARE key. The

entire display will light up. Wait

about 2 seconds untill «0 g»

appears on the display. The

kitchen scale is now ready for

weighing.

Place the item to be weighted directly on the scale. The weight

there of is displayed immediately.

To select a different measurement unit press the UNIT key to

change it accordingly to:

g = grams, lb = pounds, ml = milliliter, ﬂ.oz = ﬂuid ounces.

The scale can accept a maximum load of 5000 grams or

5000 milliliters. The weight measurement is displayed in 1 g

divisions. And the scale has a ‘tara’ adding function. Remove

the overweight when «EEEE» appears in the display. NOTE: The

total weight placed on the scale can not be more than 5000

grams.

adding function

With the adding function you can reset the display to «0 g»

after placing a product. This allows you to weigh in a bowl. Do as

follows:

1. Place an empty bowl on the scale.

2. Press the scale on with the ON/OFF/TARE key and wait till «0

g» appears on the display.

3. Place the ﬁrst product you wish to weigh in the bowl.

4. Read the weight shown on the display.

5. After weighing, press the ON/OFF/TARE key to reset the

scale to «0 g» and you can add the next ingredient.

By repeating step 3, 4 and 5 you can weigh multiple ingredients

(e.g. baking ingredients).

Note: «EEEE» appears in the display if more than 5000 grams in

total is placed on the scale.

batteries

cleaning & maintenance

English • 7

If the kitchenscale is left unused for longer than approx. 2

minutes, it automatically switches itself off. You can also turn

the scale off manually by touching the key ON/OFF/ TARE for

about 2 seconds.

When the Lo symbol appears in the display,

the batterie needs to be replaced. Open

the batterie compartment at the bottom

of the scale. If necessary please use a small

screwdriver to remove the batterie. Make

sure the batterie is placed correct (+ and -

polarity) and close the lid.

Note: Spent batteries and rechargeable batteries do not

constitute normal household waste! They are considered to

be toxic waste and, as such, should be disposed of in special

containers, toxic waste collection points or brought to electrical

goods dealers.

Remark: Batteries containing pollutant substances are marked

as follows: Pb = Battery contains lead, Cd = Battery contains

cadmium, Hg = Battery contains mercury.

Wipe the kitchenscale only with a damp cloth.

Never immerse the scale in water or any other liquids. Handle

the scale with care, protect the scale from impact with hard

object and do not drop it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpina 10672z Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info