Bedienungsanleitung Alpina ASH 2.5 E (Seite 21 von 25) (Alle Sprachen)

731995

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

3.4

Emptying the box

Make sure the shredded material in the collection box do-

esn’t reach too high a level; if this happens, the shredded

material could clog the discharge chute, causing material

to back up through the feed opening.

To remove or empty the box, turn o the motor, lower the

safety handle (1) and take out the box (2).

3.5

Clogging of material

If material to be shredded becomes clogged, you can free

the shredding roller by reversing the rotation direction of

the motor . Therefore:

– reverse the rotation direction by pushing the black but-

ton (4-▲), taking care that material does not back up

from the feeding chute;

– a led (5) lights up to indicate that rotation is in the op-

posite direction.

– when you have unblocked the material, press the black

button (3-▼) to restore the operating rotation direction.

Stop the motor and disconnect from the mains supply if

you must unclog the chute and the material discharge

chute.

3.6

End of work

When you have nished work, stop the motor by pres-

sing the red button (2-O).

Disconnect the extension lead (11) BEFORE the general

mains socket (13) THEN from the machine plug (12).

Remove and empty the container.

4. STORAGE AND MAINTENANCE

IMPORTANT - Routine and accurate maintenance is

essential in maintaining original machine safety and

performance levels.

Store the machine in a dry place.

Disconnect the machine from the mains supply

before starting any cleaning, inspection or mainte-

nance activities.

1) Wear sturdy work gloves before cleaning, maintaining

or adjusting the machine.

2) After each use, remove the collection box and clean

the remaining debris in the discharge chute.

3) After each use, spray a light layer of biodegradable

oil on the shredding roller to protect the metal from

corrosion.

4) Always make sure the air vents are free of debris.

5) Do not spray water onto and avoid wetting the motor

and electrical components. Do not use harsh liquids to

clean plastic parts.

6) Do not attempt to carry out demanding repairs without

the necessary means and technical knowledge. All

work on the machine that is poorly executed automa-

tically voids the Warranty, releasing the Manufacturer

of all liability.

4.1

Distance adjustment

The distance between the pressure plate (2) and shred-

ding roller (3) must be adjusted before using the machine

for the rst time. Afterwards, it is necessary only when

shredding proves to be imperfect.

In order to set the plate (2) in an optimal position with

regard to the roller (3), you must:

– start up the motor to activate the shredding roller (3);

– turn the handwheel (1) slowly clockwise to bring the

plate (2) closer to the roller until you hear a scraping

sound between the two parts, demonstrated by small

metal shavings falling from the discharge chute.

Avoid excessive contact in order to prevent unnecessary

wear to the plate.

5. ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of conside-

rable importance when using the machine, for the benet

of both society and the environment in which we live.

– Avoid causing any disturbance to the surrounding area.

– Scrupulously comply with local regulations for the di-

sposal of waste materials after working.

– Scrupulously comply with local regulations for the di-

sposal of packaging, deteriorated parts or any elements

with a strong environmental impact; this waste must not

be disposed of as normal waste, but must be separated

and taken to specied waste disposal centres where

the material will be recycled.

– When decommissioning, do not abandon the machine

in the environment, but hand it over to a disposal cen-

tre, in accordance with the local regulations in force.

For any doubts or problems, please do not hesitate to

contact your nearest Customer Service Centre or Your

Dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpina ASH 2.5 E Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info