Bedienungsanleitung Alpina C 2.0 ET (Seite 17 von 23) (Alle Sprachen)

732007

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

WARNING! For your safety and that of

others:

– Correct maintenance is essential to main-

tain the original eciency and safety of the

machine over time.

– Keep all nuts, bolts and screws tight to be

sure the equipment is in safe working con-

dition.

– Never use the machine with worn or dam-

aged parts. Damaged parts are to be re-

placed and never repaired.

– Only use original spare parts. Parts that are

not of the same quality can seriously dam-

age the equipment and compromise safety.

WARNING! During maintenance oper-

ations:

– Unplug the machine from the mains.

– Use protective gloves when handling the

bar and chain.

– Keep the bar protection devices on, except

when intervening directly on the bar or the

chain.

– Never dispose of oils or other polluting ma-

te rials in unauthorised places.

1. ENGINE COOLING

To avoid overheating and damage to the engine,

always keep the cooling air vents clean and free

of sawdust and debris.

2. CHAIN BRAKE

Regularly check the eciency of the chain brake.

3. CHAIN SPROCKET (Fig. 20)

Regularly check the condition of the sprocket and

replace it when wear exceeds 0.5 mm.

Do not mount a new chain with a worn sprocket

or vice-versa.

4. CHAIN CATCHER

This is an important safety device that restrains the

chain if it breaks or degrooves.

Regularly check the condition of the chain catcher

and replace it if it gets damaged.

5. NUTS AND SCREWS

Periodically check that all the nuts and screws are

securely tightened and the handgrips are tightly

fastened.

6. SHARPENING THE CHAIN

WARNING! To ensure that the chain-

saw works safely and eciently, it is essential

that the cutting components are well-sharp-

ened. Any work on the chain and bar requires

specic skills and special tools in order to do

the work properly. For safety purposes, we

recommend you contact your Dealer.

Sharpening is necessary when:

• The sawdust looks like dust.

• Cutting becomes more dicult.

• The cut is not straight.

• Vibrations increase.

A specialized centre will sharpen the chain using

the right tools to ensure minimum removal of ma-

terial and even sharpness on all the cutting edges.

Replace the chain whenever:

– The length of the cutting edges reduces to 5

mm or less;

– There is too much play between the links and

the rivets.

7. EMPTYING AND FLUSHING

THE OIL TANK

(Only if organic oil is used for the chain)

The use of some types of organic oil may cause

deposits or fouling after a certain period of use.

If this happens, before leaving the machine unu-

sed for a long period of time:

– disassemble the chain and the bar;

– empty the oil tank;

– pour a specic liquid cleanser in the tank, to

about half the maximum level;

12 MAINTENANCE AND STORAGE

8. MAINTENANCE AND STORAGE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpina C 2.0 ET Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info