Bedienungsanleitung Alpina C 38 (Seite 30 von 460) (Alle Sprachen)

608375

Zoom out

Zoom in

Vorherige Seite

1/460

Nächste Seite

PROPER USE / IMPROPER USE

Only use the machine for the purpose for which it was de-

signed, that is for “felling, bucking and delimbing trees

with dimensions suitable for the length of the bar” or

wooden objects with the same characteristics. Any other

use may be dangerous and damage the machine.

Examples of improper use may include, but are not limited

to:

– trimming hedges;

– intaglio carving;

– sectioning pallets, crates and various packing materials;

– sectioning furniture or other materials with nails, screws

or other metal components;

– butchering meat;

– using the machine to lift, move or split objects;

– using the machine while fastened to fixed supports.

Do not use chain saw for cutting plastic, masonry or non-

wood building materials. Use of the chain saw for opera-

tions different than intended could result in a hazardous sit-

uation.

A) TRAINING

1) Read the instructions carefully. Become acquainted

with the controls and the proper use of the machine. Learn

how to stop the engine quickly.

2) Never allow children or persons unfamiliar with these

instructions to use the machine. Local regulations may re-

strict the age of the operator.

3) The machine must never be used by more than one

person.

4) Never use the machine:

– when people, especially children or pets are in the vicin-

ity;

– f the user is tired or unwell, or has taken medicine,

drugs, alcohol or any substances which may slow his re-

flexes and compromise his judgement;

– if the user is not capable of holding the machine firmly

with two hands and/or remaining standing on the ground

whilst working.

5) Remember that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

B) PREPARATION

1) Always wear adequate clothing which does not

hamper movements when using the machine.

– Always wear slim-fitting protective clothing, fitted with

shear-proof protection devices.

– Always wear a helmet, protective gloves, eye-goggles,

a half-mask respirator and safety anti-shear boots with

non-slip soles.

– Always wear ear and hearing protection devices.

– Never wear scarves, shirts, necklaces, or any hanging

or flapping accessory that could catch in the machine or

in any objects or materials in the work area

– Tie your hair back if it is long.

2) WARNING: DANGER! Fuel is highly flammable:

– keep the fuel in containers which have been specifically

manufactured and homologated for such use;

– never smoke when handling fuel;

– slowly open the fuel tank to allow the pressure inside to

decrease gradually;

– top up the tank with fuel in the open air, using a funnel;

– add fuel before starting the engine. Never remove the

fuel tank cap or add fuel while the engine is run-

ning or when the engine is hot;

4 SYMBOLS / SAFETY REQUIREMENTS

3. SAFETY REQUIREMENTS

11) Fuel tank

12) Chain oil tank and oil flow adjuster

13) Carburettor adjustments

L = low speed mixture adjuster

H = high speed mixture adjuster

T = idle speed adjuster

14) Choke

15) Primer

16) Chain brake (the symbol shows

the position in which the brake is released)

EXPLANATORY SYMBOLS ON THE MACHINE (if present)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpina C 38 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info