Bedienungsanleitung Alpina NT 534 Series (Seite 16 von 23) (Alle Sprachen)

731046

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite



45. 

46. 

hands or feet near or under the opening of the cutting



OPERATING INSTRUCTIONS

For information on the engine and the battery (if sup-

plied), read the relevant owner manuals.

NOTE – The number which precedes each paragraph

links the references in the text to the respective illus-

trations (listed on page iii and following pages).

1. COMPLETE ASSEMBLY

NOTE The machine can be supplied with some parts al-

ready assembled.

WARNING! Unpacking and completing the assem-

bly should be done on a flat and stable surface, with

enough space for moving the machine and its packag-

ing, always making use of suitable equipment.

Disposal of the packaging should be done in accord-

ance with the local regulations in force.



       -



1.1 Battery connection

• Electric key ignition models





• Electric push-button ignition models

        -



2. CONTROLS DESCRIPTION

NOTE The meanings of the symbols on controls are ex-

plained in the previous pages.

2.1 Throttle lever



Lever positions are indicated on the relevant plate.



a throttle.

2.2 Engine brake lever / cutting means









2.3 Drive lever (where applicable)

-



        

released.

  -

gaged.

WARNING! To prevent damage to the transmis-

sion, do not pull the machine backwards with the

transmission engaged.

2.4 Converter control lever (if tted)

In the models with drive systems, the converter control





provided near the control lever.

IMPORTANT The engine must be running and the drive

engaged when switching from one speed to another.

Do not touch the converter control when the engine is stop-

ped. Doing this could damage the converter.

NOTE If the machine does not move forward with the le-

ver in the « » position, simply move the lever to « » and

then immediately return to the « » position.

2.5 Cutting height adjustment





DO THIS WHEN THE CUTTING MEANS IS STATIONARY.

3. GRASS CUTTING

NOTE This machine can be used to mow lawns in a num-

ber of different ways; before starting work, prepare the ma-

chine based on how the lawn is to be mowed.

DO THIS WHEN THE ENGINE IS OFF.

3.1a Preparation for mowing and grass collection

by the grass catcher:

– Lift the rear discharge guard (1) and fasten the grass



3.1b Preparation for mowing and rear discharge

of grass:

    -



 -

-



3.1c Preparation for mowing and

mulching (where applicable)

 -

-



 



-



         



3.1d Preparation for mowing and side

discharge of grass (where

applicable)

 



-



 -



 

 -

Alpina NT 534 Series Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info