Bedienungsanleitung Alpina SD 108 Series (Seite 40 von 59) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

731536

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite



battery at and ooding the engine. Turn

the key to the O position, wait for a few

seconds and then repeat the operation. If

the malfunction persists, refer to the engine

manual and chapter «14» in this manual.

6.5 OPERATION

6.5.1 Forward gear and riding

without mowing



• 

• 



• shift the throttle control to a point



and «hare» speed positions.

• For models with mechanical drive only:

1. 





2. 



3. 





The pedal has to be released

gradually, as a sudden engagement

may cause the vehicle to tip over

and the driver to lose control.

4. 

using the throttle and gear lever.

To change gear, press the clutch



IMPORTANT Gear must be engaged

when the machine has stopped.

• For models with hydrostatic drive only:

1. 



2. 









Drive can only be engaged following

the procedure illustrated (par. 5.7 to

prevent sudden engagement which may

cause the vehicle to tip over and the driver

to lose control, especially on slopes.

6.5.2 Braking









For models with hydrostatic drive only:





6.5.3 Reverse gear

IMPORTANT Reverse must be engaged

when the machine has stopped.

For models with mechanical drive only:

1. 



2. Shift the gear lever to "R"



3. 



For models with hydrostatic drive only:

1. 



2. 



6.5.4 Grass cutting





1. 





2. 



3. 





4. 







5. 





IMPORTANT To proceed in reverse gear

with the cutting means engaged, it is necessary

to press and hold the consent button (par.

5.9) so as not to cause the engine to stop.





Alpina SD 108 Series Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info