Bedienungsanleitung Alpina SGT 350 (Seite 12 von 21) (Alle Sprachen)

731969

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

WARNING! Mount the components

ve ry carefully so as not to impair the safety

and eciency of the machine. If in doubt, con-

tact your dealer.

WARNING! Make sure the machine is

not plugged into the mains socket.

WARNING! Unpacking and complet-

ing the assembly should be done on a at and

stable surface, with enough space for moving

the machine and its packaging, always mak-

ing use of suitable equipment.

Disposal of the packaging should be done in ac-

cordance with the local regulations in force.

1. JOINING THE TWO SEPARATE MACHINE

SECTIONS (Only for SGT 350)

(Fig. 1)

– Align the groove on the front section (1) with the

guide on the rear section (2) and press together

rmly until it clicks into position.

IMPORTANT

Once the two sections have

been joined, they can never be separated again.

2. MOUNTING THE FRONT HANDGRIP

(Fig. 2)

– Fit the front handgrip (1) on the support (2) so

that the seat (3) of the screw (4) is visible on the

left hand side.

– Insert the screw (4) and start to tighten the han-

dle (5).

– Before tightening the handle completely (5),

align the handgrip (1) in the most comfortable

position for the operator.

3. MOUNTING THE GUARD (Fig. 3)

WARNING! The guard must be tted

correctly to respect the safety requirements

and the correct position of the line cutting

knife.

– Hook the power unit tab (1) onto the guard seat

(2).

– Press the guard (2) upwards until you hear a

click.

IMPORTANT

Once mounted, the guard

can never be removed.

6 SAFETY WARNINGS /

MACHINE ASSEMBLY

hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col-

lection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct po-

wer tool for your application. The correct po wer tool

will do the job better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch does not

turn it on and o. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source be-

fore making any adjustments, changing accesso-

ries, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for misalignment or

obstruction of moving parts, breakage of parts

and any other condition that may aect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to become jammed and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, ta king into

account the working conditions and the work to

be performed. Using the power tool for operations

other than those intended could result in a hazardous

situation.

5) Service

a) Have your power tool serviced by a qualied

re pair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

4. MACHINE ASSEMBLY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpina SGT 350 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info