Bedienungsanleitung Alpina SGT 600 (Seite 16 von 21) (Alle Sprachen)

731970

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

10 MAINTENANCE AND STORAGE / ACCESSORIES

WARNING! For your safety and that of

others:

– After each use, disconnect the machine

from the mains and check for damage.

– Correct maintenance is essential to main-

tain the original eciency and safety of the

machine over time.

– Keep all nuts, bolts and screws tight to be

sure the equipment is in safe working con-

dition.

– Never use the machine with worn or dam-

aged parts. Damaged parts are to be re-

placed and never repaired.

– Only use original spare parts. Parts that are

not of the same quality can seriously dam-

age the equipment and compromise safety.

WARNING! During maintenance oper-

ations unplug the machine from the mains.

1. MOTOR COOLING

To avoid overheating and damage to the motor,

always keep the cooling air vents clean and free

of sawdust and debris.

2. HEAD COIL REPLACEMENT (Fig. 8)

– Press the two side buttons (1) and remove the

cover (2).

– Lift out the coil (3).

– Reposition the spring (4) and insert the new coil,

making sure that the two ends of the line (5)

protrude from the holes (6) of the head.

– Remount the cover (2).

3. SHARPENING THE LINE CUTTING KNIFE

(Only for SGT 350) (Fig. 9)

– Unscrew the two screws (1) and remove the line

cutting knife (2) from the guard (3).

– Fix the line cutting knife in a vice and sharpen it

using a at le, being careful to retain the origi-

nal cutting angle.

– Ret the knife on the guard.

SGT 600 mod. is provided with a line cutting pin

which does not need sharpening.

4. ELECTRIC CABLES

WARNING! Check the condition of the

electric cables regularly and replace them if

they are worn or their insulation looks dam-

aged.

If the electric cable is damaged, have it replaced

with a genuine spare part by a qualied technician.

5. EXTRAORDINARY MAINTENANCE

All maintenance operations not foreseen in this

manual must be performed exclusively by your

dealer.

All and any operations performed in unauthorised

centres or by unqualied persons will totally inval-

idate the warranty.

6. STORAGE

After every work stint, clean the machine thor-

oughly to remove all dust and debris, and repair

or replace any faulty parts.

The machine must be stored in a dry place away

from the elements and out of the reach of children.

The table contains a list of all available accesso-

ries, indicating those which may be used on each

machine, marked with the symbol “ ”.

WARNING! In consideration that the

selection, application and usage of the ac ces

sory to be tted in the variety of possible us-

age are actions made solely by the user, the

latter assumes responsibility for damages of

any kind due to such actions. When in doubt

or if lacking knowledge of the specicity of

each accessory, contact your retailer or spe-

cialised gardening centre.

Code Model: SGT 350 SGT 600

1911-9125-01

1911-9126-01

9. ACCESSORIES

8. MAINTENANCE AND STORAGE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpina SGT 600 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info