731984

Alpina TB 420 Seite 10

10
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
4
EN
A) TRAINING
1) Read the instructions carefully. Become a c-
quainted with the controls and the proper use of
the machine. Learn how to stop the engine qui ckly.
2) Only use the machine for the purpose for
which it was designed, namely
– cutting grass and non-woody vegetation,
u sing a nylon line (e.g. around the edges of lawns,
owerbeds, walls, fences and small gras sy areas
to tidy up the cutting done using a mower);
– cutting tall grass, dry branches, twigs and
woody shrubs of up to 2 cm diameter, with the
help of metal or plastic blades.
Any other use may be dangerous and damage the
machine.
Examples of improper use may include, but are not
limited to:
– use the machine for sweeping;
– trimming hedges or other jobs in which the cutting
device is not used on ground level;
– pruning trees;
– using the machine with the cutting device above
the operator’s belt level;
– using the machine for cutting non-plant mate rial;
– use of the machine by more than one person.
3) Never allow children or persons unfamiliar with
these instructions to use the machine. Local re-
gulations can restrict the age of the user.
4) The machine must never be used by more than
one person.
5) Never use the machine:
– when people, especially children or pets are in
the vicinity;
– if the user is tired or unwell, or has taken medi-
cine, drugs, alcohol or any substances which may
slow his reexes and compromise his judgement;
– if the user is not capable of holding the machine
rmly with two hands and/or remaining standing
on the ground whilst working.
6) Keep in mind that the operator or user is re spon-
sible for accidents or hazards occurring to other
people or their property.
B) PREPARATION
1) Always wear adequate clothing which does not
hamper movements when using the machine.
– Always wear slim-tting protective clothing, tted
with shear-proof protection devices.
– Always wear a helmet, protective gloves, eye-
gog gles, a half-mask respirator and safety anti-
shear boots with non-slip soles.
– Always wear ear and hearing protection de vi ces.
– Never wear scarves, shirts, necklaces, or any
hanging or apping accessory that could catch
in the machine or in any objects or materials in
the work area.
– Tie your hair back if it is long.
2) WARNING: DANGER! Petrol is highly am-
mable:
– keep the fuel in containers which have been spe-
cically manufactured and homologated for such
use;
– never smoke when handling fuel;
– slowly open the fuel tank to allow the pressure
inside to decrease gradually;
– top up the tank with fuel in the open air, using a
funnel;
– add fuel before starting the engine. Never re mo ve
the fuel tank cap or add fuel while the en gine is
running or when the engine is hot;
– if you have spilt some fuel, do not attempt to start
the engine but move the machine away from the
area of spillage and avoid creating any source
of ignition until the fuel has evaporated and fuel
vapours have dissipated;
– immediately clean up all traces of fuel spilt on the
machine or on the ground;
– never start the machine in the same place you
re lled it with fuel;
– make sure your clothing does not come into con-
tact with the fuel, on the contrary, change your
clothes before starting the engine;
– always put the tank and fuel container caps back
on and tighten well.
3) Replace faulty or damaged silencers.
4) Before using the machine, check its general
condition and in particular:
– the throttle trigger and the safety lever must mo ve
freely, they must not need forcing and should re-
turn automatically and rapidly back to the neutral
position;
– the throttle trigger must remain locked until the
safety lever is pressed;
– the engine stop switch must easily move from one
position to the other;
– the electric cables and in particular the spark plug
cable must be in perfect condition to avoid the
generation of any sparks, and the cap must be
correctly tted on the spark plug;
– the machine handgrips and protection devices
must be clean and dry and well fastened to the
machine;
– the cutting devices and guards must be un da-
ma ged.
5) Check the correct position of the handgrips and
the connection point of the webbing, and the proper
balance of the machine.
6) Before starting work make sure that the guards
are suitable for the cutting tool being used and are
tted correctly.
7) Thoroughly inspect the whole work area and
remove anything that could be thrown up by the
ma chine or damage the cutting group or engine
(sto nes, branches, iron wire, bones, etc.).
C) OPERATION
1) Do not start the engine in a conned space
where dangerous carbon monoxide fumes can col-
lect.
SAFETY REQUIREMENTS
3. SAFETY REQUIREMENTS
… 10 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

alpina-tb-420

Suche zurücksetzen

  • Woher bekomme ich eine Bedienungsanleitung für TB 425 Hd Eingereicht am 6-6-2023 22:03

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpina TB 420 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info