Bedienungsanleitung Alpine cda 7878 r (Seite 25 von 48) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Schwedisch)

168577

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

23-EN

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be

connected to the CDA-7878R if it is Ai-NET

compatible. With a CD Changer connected to the

Ai-NET input of the CDA-7878R, the CD Changer

will be controllable from the CDA-7878R.

Using the KCA-400C (Multi-Changer Switching

device) or the KCA-410C (Versatile Link Terminal)

multiple changers can be controlled by the CDA-

7878R.

See the Multi-Changer Selection section on page

23 for selecting the CD Changers.

NOTES

• The controls on the CDA-7878R for CD Changer

operation are operative only when a CD Changer is

connected.

• The “changer” indicator illuminates in the CD Changer

mode.

• The DVD changer (optional) is controllable from the

CDA-7878R as well as the CD changer.

1 Press the SOURCE button to activate the

CHANGER mode. The display shows the

“Changer,” disc number and track number.

NOTE

The source indicator varies depending on the connected

source.

2 Press the Disc Select buttons (1 through 6)

corresponding to one of the discs loaded in the

CD Changer. The selected disc number appears

in the display and CD playback starts.

NOTES

• After selecting the desired disc, you can operate in the

same way as for the CDA-7878R CD player.

For details, please see the CD Operation section.

• If the

indicator is illuminated the Disc

Select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the

procedure is the same as for the 6-disc CD

Changer. To select discs numbered from 7 to 12,

first press the “F” button. This changes the “D”

indicator to “d.” Then press the desired Preset

button. With the “F” button activated, the Preset

buttons 1 to 6 will represent discs 7 to 12

respectively.

BANDSOURCE

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers,

the KCA-400C (Multi-Changer Switching device)

must be used. If you use 1 Switching device, you

can connect up to 4 CD Changers. If you use 2

Switching devices, you can connect up to 6 CD

Changers. When using KCA-410C (Versatile Link

Terminal), you can connect two changers and two

external outputs (AUX).

1 Press the SOURCE button on the CDA-7878R to

activate the CD Changer mode.

Alternatively, press the SOURCE button on the

Remote Control (RUE-4187) to activate the CD

Changer mode. Proceed to step 3 below to

select the desired CD Changer.

2 Press the BAND button on the CDA-7878R or

the RUE-4187 to activate the CD Changer

Selection mode.

3 The CD Changer Selection mode remains active

for 3 seconds after step 2 is performed. Press

the BAND button until the desired CD Changer

indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display

will show “NO CHGR .”

Alternatively press the BAND button on the

Remote Control until the desired changer

indicator appears on the display.

4 To operate the selected changer, see “CD Player

Operation” section.

NOTE

For further details about the external input (AUX) when

using KCA-410C, see ”Setting the AUX Mode (V-Link)"

on page 8.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine cda 7878 r Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info