Bedienungsanleitung Alpine CDA-9827 (Seite 10 von 42) (Englisch)

471309

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

8-EN

Setting the MX Mode

MX (Media Xpander) makes vocals or instruments

sound distinct regardless of the music source. The radio,

CD, and MP3, will be able to reproduce the music

clearly even in cars with a lot of road noise.

1 Press the MX button to select MX ON.

2 Press the SOURCE/POWER button to select the

source you want to MX (Media Xpander)-correct.

3 Press and hold the MX button for at least 2 seconds to

select the MX mode.

4 Turn the Rotary encoder to select your preferred

mode or OFF.

FM (MX level 1 to 3):

The medium to high frequencies become more clear,

and produces well balanced sound in all the bands.

CD (MX level 1 to 3):

CD mode processes a large amount of data during

playback. MX takes advantage of this large data

quantity to reproduce a more clear, clean output.

MP3/WMA/XM (MX level 1 to 3):

This corrects information that was omitted at the time

of compression. This reproduces a well-balanced

sound close to the original.

DVD (or Video CD):

• (MOVIE MX level 1 to 2)

The dialog portion of the video is reproduced more

clearly.

• (MUSIC MX level 1):

This disk contains a large quantity of data such as

music clip. MX uses this data to reproduce the sound

accurately.

AUX (MX level 1):

Choose the MX mode (MP3, MUSIC, or MOVIE) that

corresponds to the media connected.

If two external devices are connected, the MX mode of

each media can be selected.

SOURCE/POWER

Rotary encoder

Basic Operation

B. OUT

5 After setting, press the Rotary encoder to return to the

normal mode.

NOTES

• By "Setting the External Input Defeat Mode" (page 12) to ON,

operation is bypassed.

• To cancel MX mode for all music sources, press the MX

button to turn MX off.

• MX mode is automatically canceled if no buttons are pressed

within 15 seconds.

• Each music source, such as radio, CD, and MP3 can have its

own MX setting.

• On disks with both MP3 and CD-DA, when the source

changes from “MP3 to CD-DA” or “CD-DA to MP3”, the

MX-mode switching process may delay playback slightly.

• Setting to MX OFF makes MX mode of each music source

OFF.

• This function is inoperable when DEFEAT is ON.

• There is no MX mode for AM radio.

• If an audio processor with the MX function (PXA-H700, etc.)

is connected, its own MX processing is applied to the music

source. Since the processor MX settings may not match the

head unit, the audio processor needs to be adjusted. For

details, refer to the Owner’s Manual of the audio processor.

Blackout Mode On and Off

When the Blackout mode is turned on, the display will

turn off to reduce power consumption.

This additional power enhances the sound quality.

1 Press and hold the B.OUT button for at least 3

seconds to start the blackout mode. By doing so the

display will turn off.

NOTE

If any button on the unit is pressed during the blackout mode, the

function will be displayed for 5 seconds to show the operation

before returning to Blackout mode.

To cancel the blackout mode, press and hold the

B.OUT button for at least 3 seconds.

DISP/TITLE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDA-9827 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info