Bedienungsanleitung Alpine CDE-104BTI (Seite 11 von 39) (Englisch)

60768

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

9-EN

Presetting Stations Manually

Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

Press and hold, for at least 2 seconds, any one of the

preset buttons (1 through 6) into which you wish

to store the station.

The selected station is stored.

The display shows the band, preset number and station

frequency memorized.

• A total of 30 stations can be stored in the preset memory (6 stations

for each band; FM1, FM2, FM3, MW and LW).

• If you store a station in a preset memory which already has a station,

the current station will be cleared and replaced with the new station.

• If the indicator is illuminated, turn off the indicator by pressing

FUNC./SETUP, and then you can perform the operation.

Presetting Stations Automatically

Press BAND/TA repeatedly until the desired radio

band is displayed.

Press and hold TUNE/A.ME for at least 2 seconds.

The frequency on the display continues to change while the

automatic memory is in progress. The tuner will

automatically seek and store 6 strong stations in the

selected band. They will be stored into preset buttons 1 to 6

in order of signal strength.

When the automatic memory has been completed, the tuner

goes to the station stored in preset location No.1.

• If no stations are stored, the tuner will return to the original station

you were listening to before the auto memory procedure began.

Tuning to Preset Stations

Press BAND/TA repeatedly until the desired band is

displayed.

Press any one of the station preset buttons

(1 through 6) that has your desired radio station in

memory.

The display shows the band, preset number and frequency

of the station selected.

• If the indicator is illuminated, turn off the indicator by pressing

FUNC./SETUP, and then you can perform the operation.

* The illustrator is for CDE-104BTi.

Setting RDS Reception Mode and

Receiving RDS Stations

The RDS (Radio Data System) is a radio information system using the

57 kHz subcarrier of regular FM broadcast. The RDS allows you to

receive a variety of information such as traffic information, station

names, and to automatically re-tune to a stronger transmitter that is

broadcasting the same programme.

Press FUNC./SETUP so that the indicator

lights up.

Press 1 /AF to activate the RDS mode.

Press or to tune in the desired RDS

station.

Press 1 /AF again to deactivate the RDS mode.

Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

• Operate the unit while the indicator lights up. If no operation is

performed for 10 seconds, the indicator goes out.

The RDS digital data includes the following:

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

EON Enhanced Other Networks

RDS

BAND/TA

//ENT

VIEW

1/AF

FUNC./SETUP

/SOUND

Rotary encoder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-104BTI Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-104BTI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info