Bedienungsanleitung Alpine CDE-104BTI (Seite 26 von 39) (Englisch)

60768

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

24-EN

Dialing a Number In The Phone Book

Up to 1,000 telephone numbers are downloadable from a mobile phone.

Dial a call by selecting a person from the phone book list.

Setting item: PHONE BOOK

• If a name cannot be obtained via the phonebook, “----------” is

displayed.

• The order of the list display depends on the design of the mobile

phone.

• If the call history or phonebook of the mobile phone is added or

deleted while it is connected to the unit, the list displayed on the unit

may not be brought up to date. If it is not updated, you cannot

correctly place a call.

Voice Dial Operation

You can call the telephone by performing voice operation.

Press and hold /VOICE DIAL for at least

2 seconds.

The speak mode is activated, and “SPEAK” is displayed.

Say the telephone number, name you want to call

into the microphone.

• You can perform this operation only when a voice dial compatible

mobile phone is connected. If the mobile phone is not compatible

with the voice dial, “NO SUPPORT” is displayed for 2 seconds.

• The Voice Dial function performance depends on the recognition

range of the mobile phone and mounting location of the microphone.

Note when the microphone is mounted.

• Voice dial operation depends on the function of the mobile phone.

For details, refer to the Owner’s Manual of the mobile phone.

• If a called person that you say is not found, “NO CALL” is displayed

for 2 seconds.

• If you place a call via voice dial, you cannot display a phone number

or name.

Adjusting the volume when receiving a

Call

While calling, you can adjust the volume.

Turn the Rotary encoder to adjust the volume.

• You may need to increase volume from your regular audio listening

source level. However, increasing the volume excessively may result

in feedback. If feedback is noticed as feedback is directly related to

the volume, turn down the volume as low as acceptable to eliminate

it. Positioning the microphone in a direction away from the main car

speakers (e.g. clipped on sun visor) may also reduce feedback at high

volume.

Call Switching Operation

While making a call, this function allows you to initiate the transfer of

the audio between the mobile phone and the speakers in the car.

While calling, press and hold / /ENT for at least

2 seconds to switch the call sound between the unit and

mobile phone.

• Depending on the mobile phone, this operation may not be

performed.

* The illustrator is for CDE-104BTi.

Controlling USB memory (Optional)

A USB memory device may be connected to this unit. With USB

memory connected, playback of files on the device is controlled from

this unit.

• The controls on this unit for USB memory operation are operative

only when a USB memory is connected.

Playing MP3/WMA/AAC Files with the

USB memory (Optional)

If you connect a USB memory containing MP3/WMA/AAC, you can

play these files on this unit.

The following table shows which files in the USB memory can be

played .

USB memory (Optional)

MP3 WMA AAC

CDE-101R

CDE-101RM

CDE-102Ri

CDE-103BT

CDE-104BTi

SOURCE/

//ENT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-104BTI Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-104BTI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info