Bedienungsanleitung Alpine CDE-111RM (Seite 11 von 37) (Englisch)

471385

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

9-EN

Make sure that the  indicator light goes out, then

press the preset button in which your desired RDS station

is preset.

If the preset station’s signal is weak, the unit automatically

searches and tunes to a stronger station in the AF (Alternative

Frequencies) list.

If the preset station and the stations in the AF list cannot

be received:

When the PI SEEK setting is on (refer to “PI SEEK Setting” on

page 9), the unit searches again for a station in the PI

(Programme Identification) list.

If there are still no stations receivable in the area, the unit

displays the frequency of the preset station and the preset

number disappears.

If the signal level of the Regional (Local) station being tuned

becomes too weak to receive, press the same preset button to

tune in a Regional station in other district.

Notes

• For presetting the RDS stations, refer to the Radio Operation section.

The RDS stations can be preset in the F1, F2 and F3 bands only.

• Operate the unit while the  indicator lights up. If no operation is

performed for 10 seconds, the  indicator goes out.

Receiving RDS Regional (Local) Stations

Press and hold FUNC.SETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the REGIONAL mode,

and then press ENT.

Turn the Rotary encoder to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the

related local RDS station.

Press and hold FUNC.SETUP for at least 2 seconds to

return to normal mode.

Notes

•Press SOUND to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

PI SEEK Setting

Press and hold FUNC.SETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the PI SEEK mode, and

then press ENT.

Turn the Rotary encoder to select ON or OFF.

Press and hold FUNC.SETUP for at least 2 seconds to

return to normal mode.

Notes

•Press SOUND to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

Receiving Traffic Information

Press and hold BANDTA for at least 2 seconds so that the

“TA” indicator lights up.

Press  or  to select your desired traffic information

station.

When a traffic information station is tuned in, the “TP” indicator

lights up.

Traffic information is heard only when it is being broadcast. If

traffic information is not being broadcast, the unit is set in the

standby mode. When a traffic information broadcast begins, the

unit automatically receives it and the display shows “TRF-INFO”

for 5 seconds.

When the traffic information broadcast is over, the unit will

automatically set in the standby mode.

Notes

• If you do not want to listen to the traffic information being received,

lightly press BANDTA to skip that traffic information message. The TA

mode will remain in the ON position to receive the next traffic

information message.

• If the volume level is changed while receiving traffic information, the

changed volume level will be memorized. When traffic information is

received next time, the volume level will be automatically adjusted to

the level memorized.

• In the TA mode, the SEEK tuning selects only the TP stations.

Receiving Traffic Information While Playing

CD or Radio

Press and hold BANDTA for at least 2 seconds so that the

“TA” indicator lights up.

Press  or  to select a traffic information station if

necessary.

When a traffic information broadcast starts, the unit

automatically mutes the CD player or the regular FM broadcast.

When the traffic information broadcast finishes, the unit

automatically returns to the original source play before the

traffic information broadcast began.

When traffic information stations cannot be received:

In the CD mode:

When the TP signal can no longer be received, the traffic

information station of another frequency will be selected

automatically.

Note

• The receiver is equipped with the EON (Enhanced Other Networks)

function in order to keep track of additional alternate frequencies to

the AF list. The “EON” indicator lights up while an RDS EON station is

being received. If the station being received does not broadcast the

traffic information, the receiver automatically tunes in the related

station that broadcasts the traffic information when it occurs.

Press and hold BANDTA for at least 2 seconds to

deactivate the Traffic Information mode.

The “TA” indicator goes out.

Displaying Radio Text

Text messages from a radio station can be displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-111RM Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-111RM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info