Bedienungsanleitung Alpine CDE-111RM (Seite 24 von 37) (Englisch)

471385

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

22-EN

You can redial the person you have previously called.

After finishing a call “----------” will be displayed, press 

within 5 seconds.

The telephone is redialed.

Note

• If you receive a call from an unknown number, you cannot use the

redial function to call back.

Call History is recorded for the last dialed/received/missed calls. There

are various ways of making calls based on the “Calling”. The following

steps 1 to 5 are common to the various ways of making these calls. For

details, refer to each individual category for making calls.

Press .

The outgoing method list is displayed.

Turn the Rotary encoder to select the outgoing mode.

 Setting item: Outgoing Mode

Setting contents:

DIALED / RECEIVED / MISSED / PHONE BOOK

DIALED:

Dialed history

RECEIVED:

Received history

MISSED:

Missed incoming history

PHONE BOOK:

Mobile phonebook

Press ENT.

The outgoing mode is activated, and each mode list is displayed.

Note

• It may take some time for the list to be displayed, and also directly after

connection, the list may not be brought up to date.

Turn the Rotary encoder to select a name or a telephone

number from the list.

Note

• The names of PHONE BOOK are listed alphabetically with the same

beginning alphabetical character, and can be skipped to the next

alphabetical character by pressing 1AF or 2.

e.g. press 2 to the section beginning with alphabet B from A.

Press ENT.

The selected telephone will be called.

If one name has several numbers registered in the telephone

book, press ENT after selecting the name

, then turn the

Rotary encoder to choose the desired number and press

ENT, the telephone will be called. Press and hold

ENT for at least 2 seconds after selecting the name, the

default number of the name will be called. Depending on the

connected mobile phone, this function may not be performed.

* If the name cannot be recognized, default number will be

displayed.

Notes

• The names registered in the telephone book are displayed. If the name

is not registered, a number is displayed. If both name and number

cannot be displayed, “ID UNSENT” will be displayed.

• If you place a call directly from the paired mobile phone, the phone

number is not displayed, you cannot redial from the unit in this case.

Redialing a Number In Outgoing History

Previously dialed telephone numbers are stored in dialed calls history.

You can redial a number by searching from dialed calls history.

 Setting item: DIALED

Dialing a Number In Incoming History

Telephone numbers from received calls are stored in the Received List.

You can redial these numbers by searching here.

 Setting item: RECEIVED

Dialing a Number In Incoming Missed Call

History

Telephone numbers for received calls that are missed, are stored in the

Missed List. You can redial these numbers by searching here.

 Setting item: MISSED

Dialing a Number In The Phone Book

Up to 1,000 telephone numbers are downloadable from a mobile phone.

Dial a call by selecting a person from the phone book list.

 Setting item: PHONE BOOK

Notes

• If a name cannot be obtained via the phonebook, “----------” is

displayed.

• The order of the list display depends on the design of the mobile phone.

• If the call history or phonebook of the mobile phone is added or deleted

while it is connected to the unit, the list displayed on the unit may not

be brought up to date. If it is not updated, you cannot correctly place a

call.

Voice Dial Operation

You can call the telephone by performing voice operation.

Press and hold VOICE DIAL for at least 2 seconds.

The speak mode is activated, and “SPEAK” is displayed.

Say the telephone number, name you want to call into the

microphone.

Notes

• You can perform this operation only when a voice dial compatible

mobile phone is connected. If the mobile phone is not compatible with

the voice dial, “NO SUPPORT” is displayed for 2 seconds.

• The Voice Dial function performance depends on the recognition range

of the mobile phone and mounting location of the microphone. Please

pay attention when the microphone is mounted.

• Voice dial operation depends on the function of the mobile phone. For

details, refer to the Owner’s Manual of the mobile phone.

• If a called person that you say is not found, “NO CALL” is displayed for

2 seconds.

• If you place a call via voice dial, you cannot display a phone number or

name.

Adjusting the volume when receiving a Call

While calling, you can adjust the volume.

Turn the Rotary encoder to adjust the volume.

Redial Function

Calling

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-111RM Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-111RM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info