Bedienungsanleitung Alpine CDE-126BT (Seite 15 von 35) (Englisch)

471376

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

16-EN

Setting the Treble Level

Turn the Rotary encoder to select the desired treble level

(-7~+7)

You can emphasise the treble level.

* The adjustment can also be made by pressing Rotary encoder.

Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/

Balance (Between Left and Right)/Fader (Between Front and

Rear)/Defeat” on page 15.

Note

• The treble level settings will be individually memorized for each source

(FM, MW (LW), CD, etc.) until the setting is changed. The Treble

frequency settings adjusted for one source are effective for all other

sources (FM, MW (LW), CD, etc.).

The High Pass Filter on this unit can be adjusted to suit your personal

taste.

 Setting item: HPF

Turn the Rotary encoder to select the desired HPF

frequency.

OFF  60 Hz  80 Hz  100 Hz

All frequencies above the selected cutoff are output.

Turning Loudness On/Off

Loudness introduces a special low-and high-frequency emphasis at low

listening levels. This compensates for the ear’s decreased sensitivity to

bass and treble sound.

Press and hold Rotary encoder (LOUD) for at least

2 seconds to activate or deactivate the loudness mode.

Note

• The function is inoperable when DEFEAT is set to ON.

Displaying the Text

Text information, such as the disc name and the track name, will be

displayed if playing a CD text compatible disc. It is also possible to

display the folder name, the file name and the tag, etc., while playing

MP3/WMA/AAC files.

Press VIEW.

The display will change every time the button is pressed.

Note

• When the TEXT SCR is set to SCR MANU, press and hold VIEW for at

least 2 seconds, the current text will be scrolled one time (except Radio

mode).

The display in Radio mode:

If there is PS (Programme Service Name)

PS (Programme Service Name)

 RADIO TEXT  PS

(Programme Service Name)

If there is no PS (Programme Service Name)

FREQUENCY  RADIO TEXT  FREQUENCY

The display in CD mode:

TRACK NO./ELAPSED TIME  TEXT (DISC NAME)

 TEXT

(TRACK NAME)

 TRACK NO./ELAPSED TIME

The display in MP3/WMA/AAC mode:

FILE NO./ELAPSED TIME  FOLDER NO./FILE NO.  FOLDER

NAME  FILE NAME  ARTIST NAME

 ALBUM NAME



SONG NAME

 FILE NO./ELAPSED TIME

When displaying Text, the following indicators are lit according to the

mode.

*1 Tag information :

If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is

displayed.

Adjusting the High Pass Filter

Other Functions

About the indication display

Indicator/

Mode

CD Mode

MP3/WMA/

AAC/USB

AUDIO Mode

iPod/iPhone

Mode

 —

Folder Name

being displayed

—

 —

Artist Name

being displayed

Artist Name

being displayed



Text (Disc

Name

) being

displayed

Album Name

being displayed

Album Name

being displayed



Text ( Track

Name

) being

displayed

Song Name

File Name

being displayed

Song Name

being displayed

VIEW

SOURCE/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-126BT Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-126BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info