Bedienungsanleitung Alpine CDE-134BT (Seite 21 von 43) (Englisch)

471330

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

21-EN

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Press  to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

GENERAL is selected on the setup main menu in step 2.

Playing MP3/WMA/AAC Data (PLAY MODE)

This unit can play back CDs containing both CD and MP3/WMA/AAC

data (created in Enhanced CD (CD Extra) format). However, in some

situations, playback of an enhanced CD may be difficult. In this case,

you can choose to play back the CD data session only. When a disc

contains both CD and MP3/WMA/AAC data, playback starts from the

CD data portion of the disc.

 Setting item: PLAY MODE

Setting contents:

CD-DA (Initial setting) / CDDA/MP3

CD-DA:

Only the CD data in Session 1 can be played back.

CDDA/MP3:

CD data, MP3/WMA/AAC files in mixed mode, and multi-session

discs can be played back.

Note

• Perform this setting before inserting a disc. If a disc has already been

inserted, remove it first.

Setting the AUX SETUP Mode

You can input the audio of an external device, (such as a Portable audio

player) to the AUX connector of this unit.

 Setting item: AUX SETUP

Setting contents:

ON (Initial setting) / OFF

Set to ON when a portable device is connected. If SOURCE is

pressed and AUX is selected, the sound of the portable device is

input to the unit.

* You can change the AUX NAME display when AUX SETUP is

set to ON. Press ENTER when AUX SETUP is set to ON,

and select AUX NAME by turning the Rotary encoder, then

press ENTER. After that, turn the Rotary encoder to

select the desired AUX NAME.

Note

• When the PORTABLE is set, PMD is displayed on the unit.

OFF:

When set to OFF, AUX source cannot be selected.

Setting the AUX Level (AUX GAIN)

After setting to ON in “Setting the AUX SETUP Mode”, this setting can

be carried out.

 Setting item: AUX GAIN

Setting contents:

LOW (Initial setting) / HIGH

LOW:

Decreases the external input audio level.

HIGH:

Increases the external input audio level.

Setting the AUX MIX

With an external audio device connected to the front AUX terminal of

CDE-134BT, the voice from external device will be mixed with the radio

or CD, etc. play.

 Setting item: AUX MIX

Setting contents:

OFF (Initial setting) / ON

Notes

• Noise may be more noticeable when this function is not used. In this

case, the OFF setting is recommended.

• This setting is effective when AUX SETUP is ON.

Setting the Language (CYRILLIC)

Set the language to be displayed on the unit.

 Setting item: CYRILLIC

Setting contents:

OFF (Initial setting) / ON

OFF:

English, Latin character

ON:

Russian, English

Note

• Refer to the table below for the Russian display on this unit.

Connecting to an External Amplifier (POWER IC)

When an external amplifier is connected, sound quality can be

improved by reducing the current draw of the built-in amplifier.

 Setting item: POWER IC

Setting contents:

ON (Initial setting) / OFF

ON:

The speakers are driven by the built-in amplifier.

General Setting

CDCDCDC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-134BT Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-134BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info