Bedienungsanleitung Alpine CDE-173BT (Seite 28 von 45) (Englisch)

536895

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

28-EN

Turn the Rotary encoder to select the second letter (e.g. I),

and then press .

The letter selection list is displayed.

Turn the Rotary encoder to select the third letter (e.g. C),

and then press ENTER.

The names stored in phone book which begin with “MIC” are

searched.

Turn the Rotary encoder to select the desired name (e.g.

Michael James), and then press ENTER to make the

call.

Notes

• The initial setting of the Alphabet Search Function is only applicable to

English alphabet characters, but when “RUSSIAN” is set, Phone book

alphabet search function is also applicable to Russian letters. Refer to

“Setting the Menu Language” on page 22.

• If the selected name has several numbers registered in phone book, you

need to turn the Rotary encoder to select the desired number, and

then press ENTER.

•Press  in step 3 or 4 to delete the current entry and return to the

previous step.

• You can search for a name by its first letter, first two letters or first three

letters. Press ENTER after entering the desired number of letters. A

list displays the names beginning with the entered letter(s).

• If there is no First or Last name, you may not be able to search for a

contact using the Alphabet Search function.

If a second call is received during a current call, you can have the first

caller wait momentarily while you take the second call. When you are

finished with one call, you can switch to the other one.

If a second call is received during the current call (call1),

the information of second caller (call2) is displayed

instead of the current caller's name. Press  2, the call

waiting mode is activated.

In this case, call1 is on hold, while you take call2.

Notes

• In the call waiting mode, press 1  or  2 to switch between the calling

person and the person on hold.

• In the call waiting mode, press and hold 1  or  2 for at least 2

seconds to hang up call1 or call2, and the other call will be answered

automatically.

• In the call waiting mode, you can press VIEW to change the display

between waiting number (1or 2) and caller name.

Assign numbers that you dial frequently to presets for quick recall. You

can assign up to six frequently called phone numbers to number presets.

Select a number you want to preset from the Phone Book

list. Press and hold any one of the preset buttons (1

through 6) as the one that you wish to store the number

for at least 2 seconds.

The phone number you selected is stored in presets.

Notes

• If the name has several numbers registered in the phone book, press

ENTER after selecting the name. Turn the Rotary encoder to

choose the desired number. Press and hold any one of the preset

buttons (1 through 6) for at least 2 seconds. The selected number is

stored as a preset number.

• A total of 30 phone numbers can be stored in the preset memory ( 6

numbers for each mobile phone in the paired device list). If a mobile

phone is deleted from the paired device list, the stored preset numbers of

this mobile phone are deleted, even when it is paired again.

• If you store a phone number in a preset with a previously stored

number, the current number will be cleared and replaced by the new

one.

Press any one of the preset buttons (1 through 6) that has

had a number stored in the phone mode.

The information (name/number) stored in the preset station is

displayed.

Press ENTER or f.

The stored preset number is dialled directly.

While calling, you can adjust the volume.

Turn the Rotary encoder to adjust the volume.

Note

• You may need to increase volume from your regular audio listening

source level. However, increasing the volume excessively may result in

feedback. Feedback is directly related to the volume. Turning down the

volume as low as acceptable, will reduce it. Positioning the microphone

in a direction away from the main car speakers (e.g. clipped on sun

visor) may also reduce feedback at high volume.

While calling, activating the Voice Mute function will instantly mute the

microphone input. Your voice will not be heard by the caller.

While calling, press  to mute the microphone input.

Press  again will bring the microphone input back to its

previous volume level.

Note

• The operation can also be performed in the option menu of phone mode

(calling mode). Refer to “Option Menu Setting” on page 20.

While making a call, this function allows you to initiate the transfer of

the audio between the mobile phone and the speakers in the car.

While calling, press BAND or press and hold  to switch

the call sound between the unit and mobile phone.

Notes

• Depending on the mobile phone, this operation may not be performed.

• The operation can also be performed in the option menu of phone mode

(calling mode). Refer to “Option Menu Setting” on page 20.

Call waiting function

Preset a number in the Phone Book

(Shortcut dial)

Dialing the preset number

Adjusting the volume when receiving a

Call

Muting the microphone input quickly

(Voice Mute)

Call Switching Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-173BT Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-173BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info