Bedienungsanleitung Alpine CDE-181R (Seite 24 von 34) (Englisch)

536902

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

24-EN

To pause playback, press .

Pressing  again will resume playback.

Notes

• A song playing on the iPod/iPhone while it is connected to this unit will

continue to play from where it was paused after disconnection.

• If you listen to an episode from a selected Podcast or Audiobook, the

episode can be changed by pressing 1  or  2.

• An episode may have several chapters. The chapter can be changed by

pressing  or .

• During iPod/iPhone playback, press r, and then you can quickly

return to the hierarchy level selected last time in the search mode.

Searching for a desired Song

An iPod/iPhone can contain thousands of songs. Use one of the search

modes listed below, that you deem most effective in finding a desired

song.

Each music category has its own individual hierarchy. Use the Playlist/

Artist/Album/Song/Podcast/Genre/Composer/Audiobook/Genius Mix

List search mode to narrow searches based on the table below.

Note

• You can select your preferred search mode. Refer to “iPod/iPhone

Search Mode Setting” on page 22.

For example:

Searching by Artist name

The following example explains how an ARTIST search is performed.

Another search mode can be used for the same operation, although the

hierarchy differs.

Press ENTER to activate the search selection mode.

The “” indicator lights up.

Turn the Rotary encoder to select the ARTIST search

mode, and then press ENTER.

SHUFFLEALL

 PLAYLIST  ARTIST  ALBUM  SONG 

PODCAST

 GENRE  COMPOSER  AUDIOBOOK 

GENIUS MIX

*3/*4

 SHUFFLEALL

*1 Refer to “Random Play Shuffle (M.I.X.)” on page 25.

*2 Depending on the iPod/iPhone, podcast search is not supported.

*3 Depending on the connected iPod/iPhone, Genius Mix function

may not be supported.

*4 When an iPod/iPhone with Genius Mix List created by iTunes is

connected to this unit, GENIUS MIX search mode can be used

to search a Genius Mix List.

Note

• The display of search mode list varies depending on the setting of iPod

LIST. For details, refer to “iPod/iPhone Search Mode Setting” on

page 22.

Turn the Rotary encoder to select the desired Artist, and

then press ENTER.

Turn the Rotary encoder to select the desired Album, and

then press ENTER.

Turn the Rotary encoder to select the desired Song, and

then press ENTER.

Notes

• After pressing and holding ENTER for at least 2 seconds while in

each hierarchy (except Song, Audiobook and Genius Mix List), all songs

of the selected hierarchy are played back.

• Playback [ALL] is only applicable for those categories marked with “

”,

(refer to the table on the left) press and hold ENTER for at least 2

seconds to play back all songs in the iPod/iPhone or selected search

mode.

• While in the search mode, if you press and hold r for 2 seconds, or no

operation is performed for 10 seconds, the search mode is cancelled.

• In the search mode, pressing r will return to the previous mode.

• When search is made during M.I.X. play, the M.I.X. play mode will be

cancelled.

• “NO SONG” will be displayed if there are no songs in the selected

playlist in the PLAYLIST search mode.

• “NO PODCAST” will be displayed if there is no podcast data in the

iPod/iPhone in the PODCAST search mode.

• “NOAUDIOBOK” will be displayed if there is no audiobook data in the

iPod/iPhone in AUDIOBOOK search mode.

• “NO GENIUS” will be displayed if there is no genius mix list data in the

GENIUS MIX search mode.

• If “iPod name” stored in the iPod/iPhone is selected in the desired

Playlist search mode, and ENTER is pressed, you can search for all

songs in the iPod/iPhone. Also, if you press and hold ENTER for at

least 2 seconds, all songs in the iPod/iPhone are played back.

•Press any of the preset buttons (1 through 6) during a search to skip

over a calculated percentage of songs. For details, refer to “Direct Search

Function” on page 25.

• During search mode, a search can be made quickly by Alphabet search

function to find the desired artist or song, etc. For details, refer to

“Alphabet search function” on page 24.

Alphabet search function

The unit’s alphabet search function can be used to search for an album,

song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/

PODCAST/GENRE/COMPOSER/AUDIOBOOK search mode, select

the first letter of your desired title (album, song, etc.), the titles

beginning with this letter are listed. By using this function, you can

quickly target any song.

After selecting a search mode, press BAND/ABC SEARCH.

The letter selection list is displayed.

Turn the Rotary encoder to select a desired letter (e.g. M),

and then press ENTER.

The titles beginning with “M” are listed.

Turn the Rotary encoder to select the desired title.

Notes

• While in Alphabet search mode, pressing r will return to the previous

mode.

• If the PLAYLIST search mode is used to search for a song, the Alphabet

search function is inactive in the song search hierarchy.

• This function is unavailable when Genius Mix List is selected.

Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4

Playlist Song — —

Artist

Album

Song —

Album

Song — —

Song———

Podcast Episode — —

Genre

Artist

Album

Song

Composer

Album

Song —

Audiobook———

Genius Mix List———

Alpine CDE-181R Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-181R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info