Bedienungsanleitung Alpine cde 7854 (Seite 11 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

168305

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

9-EN

Receiving RDS Regional (Local) Stations

1 Press and hold the INTLZ button for at least 3

seconds to activate the setting mode.

2 Press the Preset 2 button to turn on or off the

REG (Regional) mode.

In the REG OFF mode, the unit automatically

keeps receiving the related local RDS station.

3 Press the INTLZ button to deactivate the setting

mode.

Receiving Traffic Information

1 Press the T.INFO button repeatedly until the

T.INFO indicator appears in the display.

2 Press the DN g or f UP button to select

your desired traffic information station. When a

traffic information station is tuned in, the TP

indicator lights up.

Traffic information is heard only when it is being

broadcast. If traffic information is not being

broadcast, the unit is set in the standby mode.

When a traffic information broadcast begins, the

unit automatically receives it and the display

shows "TRF-INFO" for a few seconds and

returns to the PS display.

When the traffic information broadcast is over, the

unit will automatically set in the standby mode.

NOTES

• If the traffic information broadcast signal falls below a

certain level, the unit remains in the receiving mode

for 1 minute. If the signal remains below a certain

level for over 1 minute, the "T.INFO" indicator blinks.

• If you do not want to listen to the traffic information

being received, lightly press the T.INFO button to

skip that traffic information message. The T. INFO

mode will remain in the ON position to receive the

next traffic information message.

• If the volume level is changed while receiving traffic

information, the changed volume level will be

memorized. When traffic information is received next

time, the volume level will be automatically adjusted

to the level memorized.

PTY (Programme Type) Tuning

1 Press and hold the PTY button for at least 2

seconds to activate the PTY mode.

The Programme Type of the station being

currently received will be displayed for 5 seconds.

• If there is no receivable PTY broadcast, "NO

PTY" will be displayed for 5 seconds.

• If no RDS station can be received, the display

shows "NO RDS."

NOTE

If no button is pressed within 5 seconds after pressing

the PTY button, the PTY mode will be automatically

cancelled.

2 Press the DN g and f UP buttons within 5

seconds after activating the PTY mode to

choose the desired programme type while the

PTY (programme type) is being displayed. Each

press scrolls the programme type by one.

3 Press the PTY button within 5 seconds after

selecting the programme type to start searching

for a station in the selected programme type.

The chosen programme type indicator blinks during

searching and lights when a station is found.

If no PTY station is found, "NO PTY" will be

displayed for 2 seconds.

Receiving Traffic Information While

Playing CD or Radio

1 Press the T.INFO button repeatedly until the

T.INFO indicator appears in the display.

2 Press the DN g and f UP buttons to

select a traffic information station if necessary.

• When a traffic information broadcast starts,

the unit automatically mutes the CD player/

changer or the regular FM broadcast.

• When the traffic information broadcast

finishes, the unit automatically returns to the

original source play before the traffic

information broadcast began.

When traffic information stations cannot be

received:

In the tuner mode:

When the TP signal can no longer be received

for over 1 minute, the "T.INFO" indicator blinks.

In the CD mode:

When the TP signal can no longer be received,

the traffic information station of another

frequency will be selected automatically.

NOTE

The receiver is equipped with the EON (Enhanced

Other Networks) function in order to keep track of

additional alternate frequencies to the AF list. The EON

indicator appears while an RDS EON station is being

received. If the station being received does not

broadcast the traffic information, the receiver

automatically tunes in the related station that

broadcasts the traffic information when it occurs.

3 Press the T.INFO button to deactivate the Traffic

Information mode.

The T.INFO indicator disappears.

LIGHT M ← CLASSICS → OTHER M

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine cde 7854 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info