Bedienungsanleitung Alpine CDE-W235BT (Seite 22 von 44) (Englisch)

471372

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

22-EN

AUX mode:

AUX SET

 VOL LV ADJ

 DIMMER

BT AUDIO mode (CDE-W235BT only):

BT SET

 VOL LV ADJ

 DIMMER

Phone mode (Non-calling mode) (CDE-W235BT only):

PHONE SET

 VOL LV ADJ

*10

 DIMMER

Phone mode (Calling mode) (CDE-W235BT only):

SPK SWITCH

*11

 VOICE MUTE

*12

 CALL WAIT

*13

 CALL

SOUND

*14

 END CALL

*15

 VOL LV ADJ

*10

 DIMMER

*1 The setting items are the same as TUNER setting in SETUP

mode. For details, refer to “SETUP” on page 22.

*2 You can individually emphasize or weaken the volume level

of the current source to create your own tonal preference. The

setting values in Option mode and in SETUP mode are

linkage. Refer to “Setting the Source Volume Level” on

page 19.

*3 Refer to “Dimmer Control” on page 24.

*4 PLAY MODE can be selected in this mode. For details, refer

to “Playing MP3/WMA/AAC Data (PLAY MODE)” on

page 24.

*5 Refer to “Setting the iPod Control” on page 33.

*6 The setting items are the same as iPod setting in SETUP

mode. For details, refer to “iPod/iPhone Setting” on page 24.

*7 AUX NAME can be selected in this mode. For details, refer to

“Setting the AUX NAME Mode” on page 23.

*8 FW VERSION can be selected in this mode. You can see the

current firmware version about BLUETOOTH by using this

setting.

*9 CALL SOUND, SENDER ID, PB UPDATE, BT MENU, PB

ORDER, AUTO ANS, SEV NAME, SPEAKER SL and FW

VERSION can be selected in this mode. For details about

these settings, refer to “BLUETOOTH SETUP” on page 26.

*10 The Hands free phone talk level, ring tone level and

microphone gain level can be adjusted by using this setting.

The setting values in Option mode and in SETUP mode are

linkage. Refer to “Setting the Source Volume Level” on

page 19.

*11 While calling, the call sound can be switched between the

unit and mobile phone by using this setting.

This operation can also be done by pressing BAND. Refer to

“Call Switching Operation” on page 31.

*12 While calling, and the Voice Mute is activated, the

microphone input will mute instantly and “VOICE MUTE”

will blink. This operation can also be done by pressing .

Refer to “Muting the microphone input quickly (Voice Mute)”

on page 31.

*13 If there is a waiting call, select this item to display the caller’s

Name and waiting number (1 or 2). Press VIEW and the

display will switch.

*14 Refer to “Setting the BLUETOOTH sound quality” on

page 27.

*15 Select this item to hang up the call.

* The illustration is for CDE-W235BT.

* The illustration is for CDE-W233R.

Setting

You can flexibly customize the unit to suit your own preferences and

usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,

etc., can be modified.

Press and hold AUDIO/SETUP (CDE-W235BT only) for at

least 2 seconds or press SETUP (CDE-W233R only) to

activate the SETUP mode.

Turn the Rotary encoder to select the desired item, and

then press ENTER.

(e.g. Select GENERAL)

AUDIO

 GENERAL  DISPLAY  TUNER  IPOD 

BLUETOOTH

SETUP

Use steps 1 to 5 to select one of the SETUP modes to modify.

See the applicable section below for details about the

selected SETUP item.

SOURCE/

/ENTER



Rotary encoder

AUDIO/SETUP

SOURCE/

/ENTER



Rotary encoder

SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-W235BT Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-W235BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info